Build Threads Details on Club Lexus SC owner vehicles

94 SC300 1JZ Build Thread

Old 10-24-12, 11:25 PM
  #1  
Kire
Driver
Thread Starter
iTrader: (5)
 
Kire's Avatar
 
Join Date: Aug 2012
Location: Arizona
Posts: 174
Likes: 0
Received 0 Likes on 0 Posts
Default 94 SC300 1JZ Build Thread

So here's my build thread for my 94' SC300. I bought the car for $500 with a clean title. This will be a drift project and my power goal is 500hp at the wheels and still be a daily

Shopping list:

1JZ from a Soarer
R154 5 Speed Transmission
264 Cams
AEM FIC or Emanage Ultimate (Still haven't decided)
2MM head gasket
6 puck ACT clutch
GT35R single kit from Supramania
650CC injectors w/ TT resistor pack
Still haven't decided on coils
17x8 Front and 17x9 Work Equips
LSD
Hopefully some 5Zigen Fireballs
TT Denso Fuel Pump

Last edited by Kire; 10-24-12 at 11:56 PM. Reason: added to list
Old 10-24-12, 11:28 PM
  #2  
Kire
Driver
Thread Starter
iTrader: (5)
 
Kire's Avatar
 
Join Date: Aug 2012
Location: Arizona
Posts: 174
Likes: 0
Received 0 Likes on 0 Posts
Default

Here's Betty and the 1JZ before the teardown. The engine is from a Soarer





2JZGE



1JZ

Old 10-24-12, 11:34 PM
  #3  
Kire
Driver
Thread Starter
iTrader: (5)
 
Kire's Avatar
 
Join Date: Aug 2012
Location: Arizona
Posts: 174
Likes: 0
Received 0 Likes on 0 Posts
Default

I've been able to remove the cylinder head, stock twin turbos, and now I'm working on the wiring harness. I'll post some pictures up as soon as I can. The twins were a pain in the *** to remove. I plan on sending the block to get machined, stripping the interior, and saving up for some gaskets.

I picked up an R154 for $300 without a bellhousing and still need to sell my A340 that came with the engine. I have a thread up with these items for sale and I'll be selling my stock 2JZ and tranny when they get pulled.
Old 10-25-12, 06:58 AM
  #4  
TweakTech
Lead Lap
iTrader: (2)
 
TweakTech's Avatar
 
Join Date: Jun 2011
Location: Charleston, SC
Posts: 403
Likes: 0
Received 0 Likes on 0 Posts
Default

that 1J looks really clean! You'll have to post pictures of the inside once you tear it down!
Old 10-25-12, 07:04 AM
  #5  
SC400slide
In Recovery Mode

iTrader: (11)
 
SC400slide's Avatar
 
Join Date: Apr 2012
Location: NM
Posts: 3,868
Received 33 Likes on 27 Posts
Default

You can't really say no to a $500 Lexus anything, especially an SC. Looking good.
Old 10-25-12, 01:38 PM
  #6  
Kire
Driver
Thread Starter
iTrader: (5)
 
Kire's Avatar
 
Join Date: Aug 2012
Location: Arizona
Posts: 174
Likes: 0
Received 0 Likes on 0 Posts
Default

I honestly didn't think it was too bad. The interior is shot but the A/C, moon roof, and most of the electronics work.

The motor is in good shape but the previous owner used some cheap gasket goo.
Old 10-25-12, 01:49 PM
  #7  
99SC42
gte & na-t
iTrader: (44)
 
99SC42's Avatar
 
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes on 7 Posts
Default

don't use a 2mm HG, just get a tt one or the stock 1jzgte HG.

Act clutches are very harsh, heavy , noisy and don't last longer.

Southbend makes some great clutches.

GL
Old 10-25-12, 01:52 PM
  #8  
Kire
Driver
Thread Starter
iTrader: (5)
 
Kire's Avatar
 
Join Date: Aug 2012
Location: Arizona
Posts: 174
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks quick, do you recommend using the 2JZGTE gasket? I know some of the holes are smaller but on supraforums a lot of mkiii guys seem to run those. I thought about 2mm since the one I pulled was that thick.
Old 10-25-12, 01:59 PM
  #9  
99SC42
gte & na-t
iTrader: (44)
 
99SC42's Avatar
 
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes on 7 Posts
Default

Yes ! I have always used the gte hg on the 1jzs since the stock 1jz hg can't be found easily now days.

2jzgte all the way, works great and it's multi layers just like the 1jzgte HG.
Old 10-25-12, 02:07 PM
  #10  
1JZPWRD
1JZ Single SC400
iTrader: (59)
 
1JZPWRD's Avatar
 
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes on 12 Posts
Default

You are using some of the same mods that I have. Which cams are you using? BC or HKS?
Old 10-25-12, 02:10 PM
  #11  
Li Ls4
Lexus Champion
iTrader: (12)
 
Li Ls4's Avatar
 
Join Date: Jan 2009
Location: NY
Posts: 1,834
Likes: 0
Received 0 Likes on 0 Posts
Default

I must disagree with quick on those act clutches. Im currently running a act clutch in my r154 and love it, not harsh at all, pedal feels just like oem and no noise. Although mine is a hd plate with a ss disk, not a 6 puck
Old 10-25-12, 03:29 PM
  #12  
2jpowa
Driver
iTrader: (3)
 
2jpowa's Avatar
 
Join Date: Jul 2011
Location: Al
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
Default

^ some people just have bad luck with a product and makes them change there a opinion. But I had a act in my srt and had good luck with it so thats why I'm gonna try it in my sc. Nice car btw !
Old 10-25-12, 03:38 PM
  #13  
OG Dada
Lexus Champion
iTrader: (10)
 
OG Dada's Avatar
 
Join Date: Apr 2011
Location: CA
Posts: 3,118
Received 16 Likes on 12 Posts
Default

You haven't even started and I'm already liking where this is going...
Old 10-25-12, 06:19 PM
  #14  
99SC42
gte & na-t
iTrader: (44)
 
99SC42's Avatar
 
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes on 7 Posts
Default

Originally Posted by Li Ls4
I must disagree with quick on those act clutches. Im currently running a act clutch in my r154 and love it, not harsh at all, pedal feels just like oem and no noise. Although mine is a hd plate with a ss disk, not a 6 puck
What act clutch do you run before you disagree with me?

All the act have dual diaphram so it's heavy when you go with a puck clutch.

With HD the pedals does not feel stock you can ask anyone that run act clutch on jz.

Depending on what clutch you get it will shatter unless you have "the special perfect clutch"

This is the clutch i had on last 5 setups
http://www.advancedclutch.com/produc...d_id=8795#8795

I ran act on all my R145 for the past 5 years, we are talking about 6 puck not full face.


Search on here and you will see that i have always ran act.

I didn't say that it doesn't work act clutches work great once you start making good power , the only clutches that they offer are HD PP with puck disc so it will chatter , harsh engagement etc..

Have you ever had crankwalk with act clutch? well i did HD pressure caused it.

I am not here to BS yall, This is the information that i had gathered from my own mistakes and i'm sharing with yall so take it for what it's worth!

Last edited by 99SC42; 10-25-12 at 06:23 PM.
Old 10-25-12, 06:27 PM
  #15  
Kire
Driver
Thread Starter
iTrader: (5)
 
Kire's Avatar
 
Join Date: Aug 2012
Location: Arizona
Posts: 174
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 1992Lexus
You are using some of the same mods that I have. Which cams are you using? BC or HKS?
I'm leaning towards BC's

Originally Posted by KingPhilip
You haven't even started and I'm already liking where this is going...
Good to know that I have some support!

Originally Posted by Quicksc4
Yes ! I have always used the gte hg on the 1jzs since the stock 1jz hg can't be found easily now days.
2jzgte all the way, works great and it's multi layers just like the 1jzgte HG.
Do you know if the 2JZ gasket kits would work?

Thread Tools
Search this Thread
Quick Reply: 94 SC300 1JZ Build Thread



All times are GMT -7. The time now is 09:54 AM.