New DD and Project: the "Rexxus"
#33
Yup, I definitely DISLIKE the black centres! haha!
Good thing i'll be taking them in to get refinished how i wanted them for a lot less than buying them new!
http://www.flickr.com/photos/zx3tuning/8459954662/http://www.flickr.com/photos/zx3tuning/8459954662/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/8458854533/http://www.flickr.com/photos/zx3tuning/8458854533/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/8458856223/http://www.flickr.com/photos/zx3tuning/8458856223/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/8458859453/http://www.flickr.com/photos/zx3tuning/8458859453/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/8459965112/http://www.flickr.com/photos/zx3tuning/8459965112/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/8458863435/http://www.flickr.com/photos/zx3tuning/8458863435/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/8458866013/http://www.flickr.com/photos/zx3tuning/8458866013/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/8458868691/http://www.flickr.com/photos/zx3tuning/8458868691/ by http://www.flickr.com/people/zx3tuning/, on Flickr
I was checking fitment, lowered a bit more and aligned and it should be perfectly flushed out. I have about a finger thickness between the backside lip and shock and knuckle... amazed that some guys run the same widths with offsets in and around the teens... So much wasted space on the inside on those setups!
Good thing i'll be taking them in to get refinished how i wanted them for a lot less than buying them new!
http://www.flickr.com/photos/zx3tuning/8459954662/http://www.flickr.com/photos/zx3tuning/8459954662/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/8458854533/http://www.flickr.com/photos/zx3tuning/8458854533/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/8458856223/http://www.flickr.com/photos/zx3tuning/8458856223/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/8458859453/http://www.flickr.com/photos/zx3tuning/8458859453/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/8459965112/http://www.flickr.com/photos/zx3tuning/8459965112/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/8458863435/http://www.flickr.com/photos/zx3tuning/8458863435/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/8458866013/http://www.flickr.com/photos/zx3tuning/8458866013/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/8458868691/http://www.flickr.com/photos/zx3tuning/8458868691/ by http://www.flickr.com/people/zx3tuning/, on Flickr
I was checking fitment, lowered a bit more and aligned and it should be perfectly flushed out. I have about a finger thickness between the backside lip and shock and knuckle... amazed that some guys run the same widths with offsets in and around the teens... So much wasted space on the inside on those setups!
Last edited by Shmee; 02-16-14 at 08:40 PM.
#38
i understand about folks running single digit offsets and their wasted space on the inside of the wheel wells. i'm happy of your wheel choice, and glad they cleared the calipers. when you go with the air setup, i am predicting you will want something more aggressive, but that can be achieved by the simple use of spacers! looking good man!
#39
Thanks.
I figure when I go air, I'll probably add width to the wheels, I should be able to add 1" F&R to the outer lips which would still give me 11s/12s with ~20et front and rear.
If my math is right--and it always is--@ -4º in the rear, the top inside edge of the wheel will move ~17mm towards the shock from straight up and ~10.5mm from the probable -1.5º of where i'm at now...
I might need a small spacer to get the lip away from the shock in that scenario. i'm more interested in wider with higher offsets and useable flush fitment than crazy dish and gangster camber.
we'll see where i'm at once the wheels are refinished and everything is installed and on the alignment rack...
I figure when I go air, I'll probably add width to the wheels, I should be able to add 1" F&R to the outer lips which would still give me 11s/12s with ~20et front and rear.
If my math is right--and it always is--@ -4º in the rear, the top inside edge of the wheel will move ~17mm towards the shock from straight up and ~10.5mm from the probable -1.5º of where i'm at now...
I might need a small spacer to get the lip away from the shock in that scenario. i'm more interested in wider with higher offsets and useable flush fitment than crazy dish and gangster camber.
we'll see where i'm at once the wheels are refinished and everything is installed and on the alignment rack...
#42
FedEx just made my day!
Purchased some Ordens from Hawaii back in January which were damaged in shipping. After 2 months of emails, pictures, documentation going back and forth, they finally approved my claim!! I'm being compensated 100% for the damage! So once I get my wheels back from the refinisher, I'll be ballin' hard all summer long!
Moral of the story, ALWAYS pay for the insurance!
If I didn't buy from a reputable seller who made sure they were insured, I'd probably be out an additional $2k on top of the $2500 I paid for them originally!
Purchased some Ordens from Hawaii back in January which were damaged in shipping. After 2 months of emails, pictures, documentation going back and forth, they finally approved my claim!! I'm being compensated 100% for the damage! So once I get my wheels back from the refinisher, I'll be ballin' hard all summer long!
Moral of the story, ALWAYS pay for the insurance!
If I didn't buy from a reputable seller who made sure they were insured, I'd probably be out an additional $2k on top of the $2500 I paid for them originally!
#43
Never updated this thread with my newer pics....
http://www.flickr.com/photos/zx3tuning/8940980683/http://www.flickr.com/photos/zx3tuning/8940980683/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/9849405105/http://www.flickr.com/photos/zx3tuning/9849405105/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/9849402085/http://www.flickr.com/photos/zx3tuning/9849402085/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/9639950281/http://www.flickr.com/photos/zx3tuning/9639950281/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/8940980683/http://www.flickr.com/photos/zx3tuning/8940980683/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/9849405105/http://www.flickr.com/photos/zx3tuning/9849405105/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/9849402085/http://www.flickr.com/photos/zx3tuning/9849402085/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/9639950281/http://www.flickr.com/photos/zx3tuning/9639950281/ by http://www.flickr.com/people/zx3tuning/, on Flickr
#45
Lexus Champion
iTrader: (15)
the ordens definitely look better now. car looks a lot better, although i personally would lower it more.
Also, i have the same headlights and i hate them because to me, their cut off line is horrible. The light output is the same as stock, if not less, even with HIDs. I had to install HIDs in the fogs and always keep the fogs on just to be able to see a decent amount in front of me. I dont know about you, but i'm planning to do a projector retrofit on mine. My previous car (sc300) had projectors and i just cant deal without them.
Also, i have the same headlights and i hate them because to me, their cut off line is horrible. The light output is the same as stock, if not less, even with HIDs. I had to install HIDs in the fogs and always keep the fogs on just to be able to see a decent amount in front of me. I dont know about you, but i'm planning to do a projector retrofit on mine. My previous car (sc300) had projectors and i just cant deal without them.