Skid racing build
11-12-12, 05:25 PM
#32
Nice guy, you missed out on a Awesome event over the weekend in houston.... gonna starting a rebuild for 2013 here soon gotta rebuild the front and rear sus. the trans and shave a lot of weight
11-25-12, 08:51 PM
#36
Pole Position
Thread Starter
Join Date: Jun 2012
Location: AZ
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
after lots of thinking I ended up picking up a new motor for this build a vvti 2jzgte.
I had to swap the oil pan to a rear sump man i was happy to see it so clean inside
Not really to much to update I finished mounting my is300 steering column and adding a tube to the strut tower for support hope to have the firewall done this weekand get the motor in soon and start the v-mount set-up.
I had to swap the oil pan to a rear sump man i was happy to see it so clean inside
Not really to much to update I finished mounting my is300 steering column and adding a tube to the strut tower for support hope to have the firewall done this weekand get the motor in soon and start the v-mount set-up.
11-25-12, 09:31 PM
#37
I like I like, going na 2jz in my missle truck for a lil beater practice day car soo i dont over drive the race car so much when i just wanna have fun. So i might start bugging you about a few things s-chassis/jz related
11-26-12, 06:28 AM
#38
Pole Position
Thread Starter
Join Date: Jun 2012
Location: AZ
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Ya I can help with that I used to have a N/A motor in my 240 a few years back.
I took my buddies missle car out last friday it was a sr pile and ended up putting a rod threw the block.
I took my buddies missle car out last friday it was a sr pile and ended up putting a rod threw the block.
11-27-12, 07:52 PM
#39
Lead Lap
iTrader: (1)
Join Date: Oct 2011
Location: az
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
after lots of thinking I ended up picking up a new motor for this build a vvti 2jzgte.
I had to swap the oil pan to a rear sump man i was happy to see it so clean inside
Not really to much to update I finished mounting my is300 steering column and adding a tube to the strut tower for support hope to have the firewall done this weekand get the motor in soon and start the v-mount set-up.
I had to swap the oil pan to a rear sump man i was happy to see it so clean inside
Not really to much to update I finished mounting my is300 steering column and adding a tube to the strut tower for support hope to have the firewall done this weekand get the motor in soon and start the v-mount set-up.
11-29-12, 06:53 PM
#40
Pole Position
Thread Starter
Join Date: Jun 2012
Location: AZ
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
well I have been doing a little work on the motor all week I swapped the oil pan out and got my motor mount brackets on with new TT motor mounts.
Today I have been dealing with the cooling system and getting it ready for the V-mount.
Today I have been dealing with the cooling system and getting it ready for the V-mount.
11-29-12, 10:16 PM
#44
man your 240 was awsome. happy to see another drift missile SC. if you dont mind me asking, and its probably a dumb question, but, why did you have holes in your spark plug cover in the 1jz in the 240. but, in another note, awesome build. looking forward to this.
12-03-12, 10:34 PM
#45
Pole Position
Thread Starter
Join Date: Jun 2012
Location: AZ
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Well after getting my car to Elevens Paint and fiber we started to fit the kit and get the coilovers in. I have a few more things to get done before anything is painted but it is getting close.
