Project: R SC300
#17
Lexus Test Driver
Join Date: May 2011
Location: Miami, FL.
Posts: 1,393
Likes: 0
Received 0 Likes
on
0 Posts
depends on the width of the wheels. if by 20x10 a 15et will set him flush with the stock fender. ask me how i know lol. he is gunna need et15 with a good set of tires just so it can look normal if hes going for tht hellaflush look then he is gunna need like et0
#18
Very expensive pull in the rear. I mean you need to buy wide wheels and fat tires to fill up those fenders.
Lame. 20x9,5" ET40 poke is 80,7mm. I think poke has to be something like 130mm with 18-19" wheels and "zero" camber.
Lame. 20x9,5" ET40 poke is 80,7mm. I think poke has to be something like 130mm with 18-19" wheels and "zero" camber.
#25
Driver School Candidate
Thread Starter
Join Date: Aug 2012
Location: Florida
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
#26
Driver School Candidate
Thread Starter
Join Date: Aug 2012
Location: Florida
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Tropical storm Isaac's got most of us here in south FLA indoors. No worries, gives me a little extra time to do an update.
6000K HID lights now installed.
Comparison with halogen lights and HID's.
Full HID lights installed. Sweet!
6000K HID lights now installed.
Comparison with halogen lights and HID's.
Full HID lights installed. Sweet!
#27
Driver School Candidate
Thread Starter
Join Date: Aug 2012
Location: Florida
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts