Mao mao's 5-speed gs300 2jzge NA-T build.
08-08-12, 01:02 AM
#1
Mao mao's 5-speed gs300 2jzge NA-T build.
So I'm finally going boosted since my car is so heavy to keep it side ways and every time i drift feels like I'm dragging a whale lols. Most of the things here are done in my garage except the engine build was done by JeffTsai. so all I'm going to do is post of up pictures hope you enjoy! 
And it begins!!
Took the transmission apart to make it stronger!
who would of known the thrust washer gave out already
Marlin Crawler time! (:
Gotta have AEM!
Parts came in !!
Jeff Tsai's Engine build
Turbo came in!
Got my Fronts full re polished to look bling bling
And my Rears re barreled to 18x12 -14 to handle the power :P
And now i am going to tow it to my buddies shop and get a full custom inter cooler piping's done and mount up my inter cooler and oil cooler then off to the shop to get a tune! stay tuned for videos of the Dyno and my upcoming Drift event
Here is my Mod's list for now (:
Built Forged block
Comp turbo 6265
Cometic headgasket
4'' Velocity stack
Drift motion Turbo kit
Tial BOV
Radiator
Flex-a-lite
Intercooler
Samco Radiator hose
Custom FFIM
Aero motive 340lph fuel pump
Tomei FPR
First State motorsport Fuel rail
Bosch 660cc injectors
Fuel return line
90mm throttle body
Glowshift Boost/Oil pres/Oil temp gauges
Greddy Oil cooler
AEM EMS v1
AEM wide band
Aem map sensor
Aem air temp sensor
ACT Extreme pressure plate
ACT 6 puck ****
Drift motion Light weight flywheel
Arp head studs
Arp flywheel bolt
3in down pipe
3in mid down pipe
3in mid Y pipe
HKS axle back exhaust
MC shift fork
MC thrust washer
MC bearing retainer
I'm missing a lot of things but oh well!
And it begins!!
Took the transmission apart to make it stronger!
who would of known the thrust washer gave out already
Marlin Crawler time! (:
Gotta have AEM!
Parts came in !!
Jeff Tsai's Engine build
Turbo came in!
Got my Fronts full re polished to look bling bling
And my Rears re barreled to 18x12 -14 to handle the power :P
And now i am going to tow it to my buddies shop and get a full custom inter cooler piping's done and mount up my inter cooler and oil cooler then off to the shop to get a tune! stay tuned for videos of the Dyno and my upcoming Drift event
Here is my Mod's list for now (:
Built Forged block
Comp turbo 6265
Cometic headgasket
4'' Velocity stack
Drift motion Turbo kit
Tial BOV
Radiator
Flex-a-lite
Intercooler
Samco Radiator hose
Custom FFIM
Aero motive 340lph fuel pump
Tomei FPR
First State motorsport Fuel rail
Bosch 660cc injectors
Fuel return line
90mm throttle body
Glowshift Boost/Oil pres/Oil temp gauges
Greddy Oil cooler
AEM EMS v1
AEM wide band
Aem map sensor
Aem air temp sensor
ACT Extreme pressure plate
ACT 6 puck ****
Drift motion Light weight flywheel
Arp head studs
Arp flywheel bolt
3in down pipe
3in mid down pipe
3in mid Y pipe
HKS axle back exhaust
MC shift fork
MC thrust washer
MC bearing retainer
I'm missing a lot of things but oh well!
Last edited by Aadaamm; 08-12-12 at 02:18 PM.
08-08-12, 02:34 AM
#3
Damn, didn't know that was what you were up to lol. Looks great man. BTW, fittings are on the way there. I gave you a whole new set, the guys shipping it for me lost them and never told me!
PS: I just noticed on a picture of the engine. You should get rid of that lightweight dampener on the crank. You will destroy the main bearings over time from the harmonics of the engine. Get a ATI Superdamper or a Fluidampr if you want to go lightweight, or just stick to stock crank pulley. Let me know if you want the ATI dampener, I know a place with a good price on it.
PS: I just noticed on a picture of the engine. You should get rid of that lightweight dampener on the crank. You will destroy the main bearings over time from the harmonics of the engine. Get a ATI Superdamper or a Fluidampr if you want to go lightweight, or just stick to stock crank pulley. Let me know if you want the ATI dampener, I know a place with a good price on it.
Last edited by JeffTsai; 08-08-12 at 02:53 AM.
