****Official Twoloose Build Thread****
05-14-12, 07:49 PM
#49
Driver
Thread Starter
iTrader: (2)
Join Date: Dec 2010
Location: MD
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
The boomslang I'm not sure, I looked into those too but all that came up was for an IS300. With Fields you can actually order vehicle specific for the Aristo V300 2jzgte either 98-00 or 01-05. The one I got from japspec is a Fields Aristo V300 2jzgte 98-00, you can order the fields from rhdjapan.com....Here
http://www.rhdjapan.com/field-one-to...yota-pt2-55223
http://www.rhdjapan.com/field-one-to...yota-pt2-55223
05-14-12, 10:40 PM
#50
Lexus Test Driver
iTrader: (4)
Join Date: May 2007
Location: Da hill fl
Posts: 1,307
Likes: 0
Received 0 Likes
on
0 Posts
Two loose is correct but it's only needed if you don't want to hack up your wiring harness hooking up things like speed cuts and standalones, oh well you snooze you lose lol all two loose has to do is plug it up and he is good to go.
06-13-12, 01:10 PM
#52
Driver
Thread Starter
iTrader: (2)
Join Date: Dec 2010
Location: MD
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
Motor being dropped off at the shop this week and the car should go in early next week. Should hopefully be done in the next couple weeks. Decided to go with bigger intercooler piping, so ordered 3' pipe last night, also ordered a Titan Motorsports tubro blanket in black. Going to see about having Freed Engineering make me a power steering reservoir when I drop the car off. Also going to order a new polished housing for the turbo....Will update will pics as progress happens..
06-16-12, 02:57 PM
#54
Driver
Thread Starter
iTrader: (2)
Join Date: Dec 2010
Location: MD
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
Dropped the motor off friday to the shop, taking the car next week. I'm excited to get this beast done, can't wait to drive it with the new motor!! Here are some recent pics...
On the way to the shop
Just looking sexy out to lunch
On the way to the shop
Just looking sexy out to lunch
07-19-12, 07:59 PM
#59
Driver
Thread Starter
iTrader: (2)
Join Date: Dec 2010
Location: MD
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
Just an update, just waiting for my time on the lift at FE to do my swap. Picked up a couple goodies over the last couple weeks. Decided to go with 3in intercooler piping instead of the 2.5 that I already have, got my 340 aeromotive pump, titan motorsports turbo blanket, polished upper rad hose and a new set of wheels. Picked up a set of 19' axis wheels with tires for $475, having a wheel shop strip the clear and polish the lips and fix the little bit of curb rash, need a 5mm spacer to clear the LS400 brakes and need to get hubcentric rings....Here are a couple pics of the wheels and test fit. Plan to go lower after the final fitment....
Axis 19's
Test fitted
Axis 19's
Test fitted
