I'm Back.....Again !!!!!
#542
I didn't even realize you went with the SP540s. I ended up ordering the D540s for my SC. Brushed and cleared all the way through. I'll post up pics when they come in. I hope they look as good as yours do.
Steve
Steve
#543
So, since my car came back I have had the most annoying screeching sound coming from the rear. I looked everywhere trying to find it and finally assumed it was my rear tein on the drivers side. The last few days I have torn the car down redoing wiring and adding more sound deadening. Yesterday I had my son drive while I sat in the back trying to find noise. That proved to not be a lot of help so when we got back I started rocking the car until I heard the noise. I finally figured out that it must be the mount we did for my second battery. After pulling that all a part I realized that wasn't it either. At this point I'm pissed and have decided I'll just sell this SOB because I'm not going to listen to this noise forever. As I started to put battery side back together I noticed the screw poking out without a nut on it next to my battery. As soon as I moved it, "bam" there was my noise. It seems my buddy Steve when he was making the bracket to help hold my battery had left the nut off my power antenna support. That damn screw coming through that hole made the worse sound possible. One nut later, and no more noise. I am a happy camper once again.
Shane
Shane
#544
Here's some completed pics. New processor wiring all done. Took a lot of stuff out and shortened a lot of wiring. Redid some of the wiring for my fuel pumps on the other side and cleaned up that wiring. I had to pull passenger door panel off too so I took pics of the 7" Scan Speak Revelator in the door and the rest of the deadening on the door. Next, cleaning up some wiring at the amps.
Shane
Shane
#549
#551
I've been trying forever to find a Pro-Fit mount to replace my butterfly cup holder. I finally found one and installed along with a spring mount for my I-phone 6. Got it installed and also installed the leftover Alpine USB cable I had at the bottom of the cup holder. I have a 4" cable that connects from the phone to the USB port. The USB port is super glued and does not budge. I loved how it turned out and it gets rid of that stupid cup holder.
Shane
Shane
Last edited by SSmith; 04-16-15 at 10:53 AM.
#554
Lead Lap
iTrader: (11)
Been following this thread intently as I am sure many others have but just haven't chimed in from being awestruck by the attention to detail. More than I could ever imagine doing to my car. Some of the mods are for a more discerning taste (truck and A pillars). But I can certainly appreciate the effort and detail....
Your wheels look great but I was dying to see the ones from the black BMW go on there. I would love to see a StopTech Trophy setup behind your wheels or a 14" Brembo kit.
Great car, truly!!!!
Your wheels look great but I was dying to see the ones from the black BMW go on there. I would love to see a StopTech Trophy setup behind your wheels or a 14" Brembo kit.
Great car, truly!!!!
#555
kbb,
I think the deal with my car is that isn't a lot of wow factor in pictures. Wherever I take the car out and people see it first hand I usually get stuck for a while talking about it. If I pop the trunk it goes to another level. I'm happy with it.
Shane
I think the deal with my car is that isn't a lot of wow factor in pictures. Wherever I take the car out and people see it first hand I usually get stuck for a while talking about it. If I pop the trunk it goes to another level. I'm happy with it.
Shane