Fidel Cashflo's 1996 LS400 drift car build
#32
Spare Tire
Spare Tire cover
Spare Tire cover cover
Cover for the spare tire cover
haha this made me laugh, nice progress. i like how those battles look on the car. i didnt think they would at first.
Spare Tire cover
Spare Tire cover cover
Cover for the spare tire cover
haha this made me laugh, nice progress. i like how those battles look on the car. i didnt think they would at first.
#36
Driver
Thread Starter
iTrader: (1)
Join Date: Apr 2011
Location: FL
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
I'll hit you up on Monday before the meet.
#37
Driver
Thread Starter
iTrader: (1)
Join Date: Apr 2011
Location: FL
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
I replaced the valve cover on the UZI, on the side that had the misfire, and it still runs like ***, but now leaks oil as well. SO I went back and tightened the bolts again, did the procedure for tightening and when I was tightening the last bolt, CRACK!!. So I called up Ranlet and I brought over my valve cover for him to weld up, he got it all sealed up, now my spark plug tube seals started leaking and my misfire is on 2/4/6/8 rather than just 6 and 8 now.
I'm over dealing with this motor and its electrical problems, I just need to get it running alright so I have a vehicle until I can put the JZ in.
I cleaned the bay and stuff.
What is left of the sticker now:
I don't know if anyone has every done it but I put a MK3 supra radiator in my UCF, these cars usually have a remote reservoir and cap that runs to the radiator, I hate that and my radiator had a crack so I replaced it with this. Its a lot cleaner looking I think and the upper hose I got for it clears the clutch fan well.
Pics of JZ motor coming soon (waiting to go pick it up), and R154 tranny coming soon as well, found one locally for $250! Yay.
I'm over dealing with this motor and its electrical problems, I just need to get it running alright so I have a vehicle until I can put the JZ in.
I cleaned the bay and stuff.
What is left of the sticker now:
I don't know if anyone has every done it but I put a MK3 supra radiator in my UCF, these cars usually have a remote reservoir and cap that runs to the radiator, I hate that and my radiator had a crack so I replaced it with this. Its a lot cleaner looking I think and the upper hose I got for it clears the clutch fan well.
Pics of JZ motor coming soon (waiting to go pick it up), and R154 tranny coming soon as well, found one locally for $250! Yay.
Last edited by Cashflo; 12-28-11 at 11:38 AM.
#40
Driver
Thread Starter
iTrader: (1)
Join Date: Apr 2011
Location: FL
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Still waiting on JZ. I got this R154 for $150!
Pics of when it arrived:
It was pretty beat looking, I got right to it with a wire wheel!
It started looking pretty decent after a few mins of cleaning.
The prehistoric pressure plate that came with it haha:
A buddy of mine, who was doing a VH45 into S13 swap recently sold his motor, had an Eaton M90 supercharger laying around, apparently a lot of UZI guys use these things, they’re pretty rad.
I also took some measurements to get an idea for how long of a shifter extension I would need to make. I need it to be about 32 inches in length, it is 25 ½ with the 1jz Bellhousing. So I need an extension of about 7”. Sweet. I’m sure this is going to be fun.
Pics of when it arrived:
It was pretty beat looking, I got right to it with a wire wheel!
It started looking pretty decent after a few mins of cleaning.
The prehistoric pressure plate that came with it haha:
A buddy of mine, who was doing a VH45 into S13 swap recently sold his motor, had an Eaton M90 supercharger laying around, apparently a lot of UZI guys use these things, they’re pretty rad.
I also took some measurements to get an idea for how long of a shifter extension I would need to make. I need it to be about 32 inches in length, it is 25 ½ with the 1jz Bellhousing. So I need an extension of about 7”. Sweet. I’m sure this is going to be fun.
#43
Driver School Candidate
Join Date: Jul 2011
Location: California
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Cant wait to see more progress..i want to do this to my ls400 as well..i haven't see any of these sliding out here in cali..want to do a similar setup b4 this becomes the new hot thing to do