Stick's Daily/Drift SC300 build
#64
Lead Lap
Thread Starter
#66
Lead Lap
Thread Starter
MOAR PIKTURES
Battle Version steering rack bushings
and heres another teaser pic of the cage, car got put back just a lil but its all good super secret spy stuffz needed to be done
Battle Version steering rack bushings
and heres another teaser pic of the cage, car got put back just a lil but its all good super secret spy stuffz needed to be done
#67
Lead Lap
Thread Starter
#68
Lead Lap
Thread Starter
went parts gathering today...
SSA all day
4'' aluminum
act stage good enuff to get rowdy clutch
newer short block thats not toasted
next is gaskets and rebuild parts (i.e. bearings, rings, etc.), the injectors, ecu and she is ready...
SSA all day
4'' aluminum
act stage good enuff to get rowdy clutch
newer short block thats not toasted
next is gaskets and rebuild parts (i.e. bearings, rings, etc.), the injectors, ecu and she is ready...
#70
Driver
iTrader: (1)
Join Date: Jul 2008
Location: Alberta
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Not to scare you or anything but didn't Full-Race have an aluminum exhaust on their "R"14 that melted from the exhaust temps and set the car on fire?
Something you might want to look into hahah I'd hate to see all of this work go up in flames!
Something you might want to look into hahah I'd hate to see all of this work go up in flames!
#71
Driver
iTrader: (1)
Join Date: Jul 2008
Location: Texas
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
I wouldnt advise an aluminum downpipe on a daily but exhaust should be fine.
Sticks - remind me if i was supposed to get you a set of injectors cause i cant remember
#72
Lead Lap
Thread Starter
The exhaust is from my car that was making 540whp with plenty of anti lag, racing, and flame shooting with no problems lol. Daily driven.
I wouldnt advise an aluminum downpipe on a daily but exhaust should be fine.
Sticks - remind me if i was supposed to get you a set of injectors cause i cant remember
I wouldnt advise an aluminum downpipe on a daily but exhaust should be fine.
Sticks - remind me if i was supposed to get you a set of injectors cause i cant remember
and i have the stock set you gave me i'm looking for bigger now still considering your top feed setup but dont wanna mess with an lines yet...
#73
Lead Lap
Thread Starter
#74
Lead Lap
Thread Starter
baisicly came thing stroker said, i had a alum exhaust made by the same shop that made his, SSA and it held up great on my 240 and i gave that thing hell 24psi on q16 avgas mix stock turbo and ecu and injectors...