My SC400 Drift SC Build!!!
#1
Driver
Thread Starter
My SC400 Drift SC Build!!!
Hi all! I'm relatively new here, been lurking for a little while now for parts and whatnot. Figured this would be a good place to document my build and get some helpful insight. I've had a few s13's in the past and one of then I slid during 08. Struggled for awhile financially and finally back on my feet and doing things for real and responsibly now so there's no chance of my plans not being successful. Anyways, life story aside, it all starts with this black beauty sc400 I purchased May 2010 from a guy in StL, MO. Turns out he's a member here, just found that out a week ago lol.
Posting from my phone so it'll take a few posts before we are up to date..
Posting from my phone so it'll take a few posts before we are up to date..
#2
Driver
Thread Starter
Parts and plans
Car is going to be mostly track only, doubt I'll drive it on the street. I'll try to keep an updated parts list here of what's bought and what I'm still needing/looking for
Bought and completed:
Formula D spec cage
PBM coils and spacers and diff bushings
DST steering and sway bar bushings
Bee*R rev limiter
Origin rear window spoiler
Recaro Pole Position and Recaro SPG
Takata harnesses
4 MB weapons 18x9.5 +15
4 stock sc430 18s(drift spares)
ASD hydro e-brake
Stock bumpers
Soon to buy:
Carbon fiber doors, hood, trunk, and sunroof cover
LS1 w T56
Rear control arms and other misc suspension stuff
Oil and power steering coolers
10 gal fuel cell
LS400 BBK with stainless lines
New AERO!!!
2-way diff
2j rear sump w/pickup and pan
Bought and completed:
Formula D spec cage
PBM coils and spacers and diff bushings
DST steering and sway bar bushings
Bee*R rev limiter
Origin rear window spoiler
Recaro Pole Position and Recaro SPG
Takata harnesses
4 MB weapons 18x9.5 +15
4 stock sc430 18s(drift spares)
ASD hydro e-brake
Stock bumpers
Soon to buy:
Carbon fiber doors, hood, trunk, and sunroof cover
LS1 w T56
Rear control arms and other misc suspension stuff
Oil and power steering coolers
10 gal fuel cell
LS400 BBK with stainless lines
New AERO!!!
2-way diff
2j rear sump w/pickup and pan
Last edited by Jared36; 01-20-11 at 04:21 PM. Reason: Update
#3
Driver
Thread Starter
Demolition
Started right away with removing all unnecessary things that'd be in the way for my cage and whatnot. Sold the 1uz to a friend it's going in his drift Tacoma with a supercharger.
Edit: can't post any more pics right now cause too big?? Nevermind I think img code is working
Edit: can't post any more pics right now cause too big?? Nevermind I think img code is working
Last edited by Jared36; 11-23-10 at 04:33 PM.
Trending Topics
#9
Driver
Thread Starter
Cage was finished in a couple weeks so I brought it back to my house...a month later it goes to my friends house where it'll be till we are done with it.
Lookin all beastly
Lookin all nasty!
Lookin all beastly
Lookin all nasty!
#12
Driver
Thread Starter
Thanks guys!! Yeah I specified that I wanted decent room(Im 6'3 215Lbs)so good cage fitment was a must! Lots and lots to do though...probably won't be done till this time next year, on a tighter budget now so I'll actually have money left over when it's all done.
#15
Driver
Thread Starter
Oh herroh mr supersayianjim or whatever your other name is lol.
Update of a few more parts...
Mb Battles
Sc drift spares, got tires on them now..
Got some stock bumpers
Picked up this 95 5spd s14 with a bad ka for 1k for a future daily/drift/beater lol
Update of a few more parts...
Mb Battles
Sc drift spares, got tires on them now..
Got some stock bumpers
Picked up this 95 5spd s14 with a bad ka for 1k for a future daily/drift/beater lol