My Turbo Build Complete.....For Now! ;)
#1
My Turbo Build Complete.....For Now! ;)
It is together and running.....
Dyno'd 295 WHP @ 6.8 PSI last Monday on 91 octane and with it being 108* here in Arizona.
http://members.***.net/acmeturbo/dyno062110.pdf
Here are the final pics:
Here are the specs:
SRT 2.75 Turbo Kit
Mishimoto Radiator and Thermostat
Polished turbo compressor housing, intake manifold & throttle body
HPC coated manifold, turbine housing, downpipe, mid pipe and dump tube
ACT 6 Puck Sprung Hub Disk & Extreme Pressure Plate
Factory W55
Future Plans:
I did not install the thicker headgasket or ARP head studs since I have a GS300 motor that I will be building.
Dyno'd 295 WHP @ 6.8 PSI last Monday on 91 octane and with it being 108* here in Arizona.
http://members.***.net/acmeturbo/dyno062110.pdf
Here are the final pics:
Here are the specs:
SRT 2.75 Turbo Kit
Mishimoto Radiator and Thermostat
Polished turbo compressor housing, intake manifold & throttle body
HPC coated manifold, turbine housing, downpipe, mid pipe and dump tube
ACT 6 Puck Sprung Hub Disk & Extreme Pressure Plate
Factory W55
Future Plans:
I did not install the thicker headgasket or ARP head studs since I have a GS300 motor that I will be building.
Trending Topics
#12
Lexus Champion
iTrader: (2)
nice car but that is a lot of gauges. no way you can monitor all those gauges.
a few quick suggestions would be to get rid of that breather filter on the exhaust side and go back to a hose or maybe a catch can before you start a oil fire. also try to turn the turbo intake pipe so its not directly behind the radiator fans sucking in hot air
a few quick suggestions would be to get rid of that breather filter on the exhaust side and go back to a hose or maybe a catch can before you start a oil fire. also try to turn the turbo intake pipe so its not directly behind the radiator fans sucking in hot air