self built 800rwhp project sc300
09-19-08, 10:17 AM
#34
very nice set up just one question why the direct port set up for meth? and what pressure are you running the meth set up at? personally i would never have it that close always atleast 6 inches infront of the throttle body for fear of it not having enough time or distance to fully vaporise. just the general rule of thumb ive always followed with methanol.
Jon
09-19-08, 10:39 AM
#35
Racer
wow... pics of the SP valve installed plz =P
09-19-08, 04:08 PM
#38
Rookie
Thread Starter
Join Date: Sep 2008
Location: nj
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
thanks a lot everyone for the compliments. yes i have a shop with a few buddies of mine so its in the works. OK about the meth, I have 2 pumps running at there max pressure. the key is not to put a big jetted nozzles. you don't need them big now because you are running one for each cylinder. the goal is to try to make the finest mist possible so when it get to where it has to go the heat from the motor can evaporate it. I also use a 50/50 mix i dont buy that 100% is better since water is what stops the knock meth adds a little gain in octane but its only around a 5% increase and helps cool the air charge. If anyone needs help with there car you can pm me or call me 862 438 2457. Oh thanks alot gunner and Arizona it was fun working on your car and on the ported head. Well not the head to much, takes to much time.lol I have a spare na head that im going to start porting if anyone wants it let me know call or pm me and ill give you a price. thanks again everyone ill keep you guys posted with more pics soon.
09-21-08, 09:32 AM
#42
Rookie
Join Date: Jul 2006
Location: nj
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Whats up Tito... car is looking good, I had him do my Fab work on my early GS300 with GTE motor/ Single Turbo ... He made my front mount intercooler fit with all piping and then the custom downpipe with flex pipe. I have since sold that car.
09-27-08, 10:53 PM
#45
Rookie
Thread Starter
Join Date: Sep 2008
Location: nj
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
ok here are some update pis of my sp spool up valve and 4in hks titanium modified exhaust that i made.
also like to thank Louis and Steve for giving me a hand. you cant make a exhaust with just one person it takes a team to make things come out right. now henri get that wiring done lol.
also like to thank Louis and Steve for giving me a hand. you cant make a exhaust with just one person it takes a team to make things come out right. now henri get that wiring done lol.