timywong's jzs147 build
#1
Lead Lap
Thread Starter
timywong's jzs147 build
because i just got these wheels.
I was surpassed i could fit a full set of 19s in the backseat. The wheels are nothing special. i'll post pics of the car in the day tomorrow.
I was surpassed i could fit a full set of 19s in the backseat. The wheels are nothing special. i'll post pics of the car in the day tomorrow.
Last edited by timywong; 12-27-07 at 12:13 AM.
The following users liked this post:
617kirk (09-27-19)
Trending Topics
#8
Lead Lap
Thread Starter
planning on dropping the car on coilovers. but i havent decided on what brand. any input?
The wheels are Jaz Wheels and the model is the Trinity. They were also sold under Axis wheels.
specs
f: 19x8.5 +45 245/35
r: 19x9.5 +45 275/30
They werent the specs i'd go with but they fit awesome. the rears i just want to get longer studs so i can run like a 10mm spacer. the front fits like perfect, pretty flush, but its hard to tell since its so high. lol The front wheels clears the break like <5mm but does anyone know if those specs will clear LS calipers? or how big of a spacer would i need to clear LS calipers?
The wheels are Jaz Wheels and the model is the Trinity. They were also sold under Axis wheels.
specs
f: 19x8.5 +45 245/35
r: 19x9.5 +45 275/30
They werent the specs i'd go with but they fit awesome. the rears i just want to get longer studs so i can run like a 10mm spacer. the front fits like perfect, pretty flush, but its hard to tell since its so high. lol The front wheels clears the break like <5mm but does anyone know if those specs will clear LS calipers? or how big of a spacer would i need to clear LS calipers?
#12
Pole Position
Join Date: Nov 2007
Location: Saarland,-Germany
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
come to think of it.. the +45 offset(with a 5mm spacer) may just about clear the ls400 calipers .. but it also depends on how thick those spokes are.
Youll need to test fit , maybe a member in your area has 5mm spacers ,you could try mocking up something.
Youll need to test fit , maybe a member in your area has 5mm spacers ,you could try mocking up something.
#13
Lead Lap
Thread Starter
I was just playing around in photoshop. but i changed it.
Ill try and post more pics tomorrow.