Installation instructions axle back JoeZ exhaust
07-05-14, 01:00 PM
#1
Driver
Thread Starter
Installation instructions axle back JoeZ exhaust
hello CL,
I was researching here and on YouTube, I can't really find any installation instructions for my JoeZ axle back exhaust. I'm planing to install myself to save some cash. My exhaust comes in on Monday and I just want to be ready. Thanks in advance!
I was researching here and on YouTube, I can't really find any installation instructions for my JoeZ axle back exhaust. I'm planing to install myself to save some cash. My exhaust comes in on Monday and I just want to be ready. Thanks in advance!
07-05-14, 06:08 PM
#2
Driver School Candidate
Check out this link to the Joe Z exhaust install.
https://www.clublexus.com/forums/per...r-rwd-3is.html
What I see is 2 bolts and 3 hangers on each side. Seems pretty straight forward. Is there a certain part of the install you're concerned about?
https://www.clublexus.com/forums/per...r-rwd-3is.html
What I see is 2 bolts and 3 hangers on each side. Seems pretty straight forward. Is there a certain part of the install you're concerned about?
07-05-14, 09:36 PM
#3
Jack car up, use ramps or jackstands.and have a backup.
It's 4 bolts total, slide old exhaust out of rubber hangers (WD40 helps). Install is reverse of removal. Hardest part is two.of the four bolts are th to reach. It was one ratchet click at best.with the room I had, so took 5 minutes of one click to get that bolt off.
It's 4 bolts total, slide old exhaust out of rubber hangers (WD40 helps). Install is reverse of removal. Hardest part is two.of the four bolts are th to reach. It was one ratchet click at best.with the room I had, so took 5 minutes of one click to get that bolt off.
Thread
Thread Starter
Forum
Replies
Last Post
