doverrx330

I've look on threads but did not find this issue. My driver window will go up after activating the switch, that's not the issue. The issue is it will go all the way up until it touches the top but come right back down as if it sensed something is blocking it. It stops half was when it comes down. When I activate the switch for it to go up and press outward slightly on the top of the window until it closes, its stay closed. So, before someone sarcastically suggests I can solve this by pressing the window as it goes up, has anyone experienced this and what was your solution.

salimshah

Dont get mad

search on window found this for me:
https://www.clublexus.com/forums/rx-...teresting.html

Tell us if this does not solve your problem.

Salim

jimbonuttz

im having this same issue, were you able to ever figure out what was wrong?

RX330inFL

Disconnect the battery for a bit. Worth a try.

kickin8

iTrader: (1)

you just need to reset the windows....

mandyfig

Have you resolved this issue? Did the re-set fix it?

doverrx330

i've tried to reset the windows as outlined in the manual. it will work properly sometimes by itself -- mostly in the morning after sitting all night but as the day progresses, it acts up; must be a glitch in the system. I can live with it.

salimshah

How about resetting the window later in the day when it acts up. This will program slightly more torque in the pinch protection sensor.

Salim

kiwi

you need to lube the window run channels and possibly re-calibrate the switch.

i would recommend going to the dealer, they should lube it for you for free. or, go to an auto parts store and pick up a can of silicone spray, dont use WD40, that stuf is junk.