Official Sharpie IS350 Continuous Build Thread
Driver School Candidate
Joined: Aug 2007
Posts: 41
Likes: 0
From: California
stevens creek lex? Is it there now through december? I live right in the area I would love to stop by and check it out.
EDIT: I skipped a page....duh. I'll come check it out in december. Great looking car man
EDIT: I skipped a page....duh. I'll come check it out in december. Great looking car man
November Feature!
http://tunerplayground.com/index.php?act=cars&id=5
@ Lexus SEMA Showcase gallery
http://www.lexus.com/SEMA/
http://tunerplayground.com/index.php?act=cars&id=5
@ Lexus SEMA Showcase gallery
http://www.lexus.com/SEMA/
Last edited by LSCJJ; Nov 2, 2009 at 06:17 PM.
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Top 10 Most Confusing Things Lexus Has Ever Done!
Joe Kucinski
2026 Lexus ES Review: Lexus Re-Embraces Founding Principles
Michael S. Palmer
10 Lexus Bargains That are Cheaper Than a New Toyota RAV4
Joe Kucinski
8 Weirdest Things Lexus Has Ever Built
Verdad Gallardo
10 Lexus Designs That Have Aged Like Fine Wine
Verdad Gallardo
8 Tips for Improving Your Hybrid or Plug-in Hybrid's Efficiency!
Michael S. Palmer
10 Best Lexus Models No One Remembers
Joe Kucinski
TRD Off-Road Premium: Best 2026 4Runner, Except This One Thing
Michael S. Palmer
Top 10 Lexus & Toyotas to Drive Before You Die!
Joe Kucinski
For the Audio system, we decided to go with a MMats ProAudio 2100 Watt Amplifier for the sub and a custom Nuforce amplifier for the speakers inside - most likely will be some Focal component speakers. we'll see.
first things first....
remove all of the interior and get some design going.
Rear seats and stock sub comes off
time for a template:
it was made to fit the curves on the bottom of the speaker, and then will use a a piece of wood later to build the final. must be able to hold the finished 21" speaker inside without rattles.
Next up.... need to start plugging in all holes and seal them with silicone glue, then dynamat the trunk.
going to SEMA this week, so will update once we get all the parts in.
first things first....
remove all of the interior and get some design going.
Rear seats and stock sub comes off
time for a template:
it was made to fit the curves on the bottom of the speaker, and then will use a a piece of wood later to build the final. must be able to hold the finished 21" speaker inside without rattles.
Next up.... need to start plugging in all holes and seal them with silicone glue, then dynamat the trunk.
going to SEMA this week, so will update once we get all the parts in.
Last edited by LSCJJ; Nov 2, 2009 at 09:01 PM.
Rookie
Joined: Sep 2009
Posts: 73
Likes: 0
From: ny
the car is WILD. i dont think i would particularly like it in person, but the idea is amazing, the pictures all look amazing, and getting recognized by lexus and tunerplayground and sema (and all the sexy ladies) is a major +++
hardwired? this means its built into the dash? or is it the external unit you plug into the cig lighter?
btw the progression vid is BEAST.
Electronics
Valentine 1 Hardwired Radar Detector
Valentine 1 Hardwired Radar Detector
hardwired? this means its built into the dash? or is it the external unit you plug into the cig lighter?
btw the progression vid is BEAST.
the car is WILD. i dont think i would particularly like it in person, but the idea is amazing, the pictures all look amazing, and getting recognized by lexus and tunerplayground and sema (and all the sexy ladies) is a major +++
hardwired? this means its built into the dash? or is it the external unit you plug into the cig lighter?
btw the progression vid is BEAST.
hardwired? this means its built into the dash? or is it the external unit you plug into the cig lighter?
btw the progression vid is BEAST.
hardwired means the unit is wired to a continuous 12V someone in the car. This way its on when it turn on the car and off when i turn it off, also doesnt have a wire dangling in the center. tucked into the headliner.