Originally Posted by sakataj

this link doesnt work Sam



first off great question Robert.....how much power is this supposed to make

from some research online, bout halfway down the page

http://www.jdm-option.com/eng/featur...tas2007_9.html

it claims

"Using an Eaton type MP90 supercharger unit, this kit was designed for the Celsior and Majesta line of vehicles. More power and torque can be experienced at any power band, and 345 horsepower can be extracted at its peak. Along with the kit comes a set of 660 injectors, and an eManage system."

i figure this is RWHP though so maybe about 380-415 flywheel power. front mount intercooler,headers,intake,exhaust i would think should easily make 450 WHP.

more research here

http://www.trust-power.com/06new/e20...r_charger.html

shows it makes 250.4 kilowatts so about 336 hp

second off go away.....your not getting this SC from me also to install, remove and sell lol



Sam, i keep coming back in here and studying this, what else is needed for install? box picture isnt clear, what all comes with this?

attached is my Fav pic of this installed

Originally Posted by sakataj

this link doesnt work Sam



first off great question Robert.....how much power is this supposed to make

from some research online, bout halfway down the page

http://www.jdm-option.com/eng/featur...tas2007_9.html

it claims

"Using an Eaton type MP90 supercharger unit, this kit was designed for the Celsior and Majesta line of vehicles. More power and torque can be experienced at any power band, and 345 horsepower can be extracted at its peak. Along with the kit comes a set of 660 injectors, and an eManage system."

i figure this is RWHP though so maybe about 380-415 flywheel power. front mount intercooler,headers,intake,exhaust i would think should easily make 450 WHP.

more research here

http://www.trust-power.com/06new/e20...r_charger.html

shows it makes 250.4 kilowatts so about 336 hp

second off go away.....your not getting this SC from me also to install, remove and sell lol



Sam, i keep coming back in here and studying this, what else is needed for install? box picture isnt clear, what all comes with this?

attached is my Fav pic of this installed

Originally Posted by sam430

Damn, beautiful! Who's that belong to?

Originally Posted by passnu2

Yup his kit is full, I had the only other "bolt on" kit out there thanks to the OP. I was missing only a few parts and had them fabricated.

3gen GS430 owners just install and drive nothing else is needed

As for the kits there was only three, Sam's being complete and mine almost. The last kit is/was just the manifold and blower that had to be re-sized to work/fit the GS.

Neurocity time to sell the h & pick up a GS430 & this kit

Seller is awesome to deal with
GLWS

Edit: stand corrected so there are 4 out there, 2 being complete, mine was only missing a few brackets and the pulley (yes it was authentic), and one more that is just the manifold & TRD blower that is not a direct bolt on.

So I had the missing brackets made from aircraft aluminum, stronger then the original brackets. Still sad I never got to at least try it after all that work....

Originally Posted by sam430

Originally Posted by hellofello

Kinda hard for anyone to get this, does it comes with any ecu or kit to help you tune this, after it's installed?