MA Carbon Fiber Roof Spoiler
#1
Carbon Fiber Roof Spoiler
I picked up a CF roof spoiler from a local on craigslist, had some chips on it so I fixed it up (epoxy, clear coat, sanded and buffed) and is about 8/10. I mounted it but decided i didn't really like the look of it so I took it off and is up for sale. I will update with more detailed pictures of the blemishes.
Looking to get $75 shipped
Looking to get $75 shipped
#4
I believe it fits all years 06-13? I have a 2012 and the fitment was perfect. i don't believe there is a brand but I will check ASAP, most likely an eBay rep?
Tails are Spec-D from eBay... advertised as 06-08, but again, they work on my '12. i did a write up on them if you wanted to know more
Tails are Spec-D from eBay... advertised as 06-08, but again, they work on my '12. i did a write up on them if you wanted to know more
#6
Better pictures here, there are a couple of tiny spots the camera doesn't pic up, similar to when a surface bubble pops on the surface. The underside has the marks you see but the shape remains true. I forgot until typing this there was one section that the CF had lifted from the underside, but I had repaired that as well, i can take a picture of that later if anyone wants to see it.
Small chip which has been colored, filled with epoxy and smoothed
close up of previous chip
this is the most noticeable the spot is... IMO not very, especially when mounted
few surface blemishes, very superficial, probably can be sanded/buffed out
underside, no cracks
Mounted for less than 24 hours
Small chip which has been colored, filled with epoxy and smoothed
close up of previous chip
this is the most noticeable the spot is... IMO not very, especially when mounted
few surface blemishes, very superficial, probably can be sanded/buffed out
underside, no cracks
Mounted for less than 24 hours
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
bob4256
4Gen GS450H / 350 / 300 / GS-F Classifieds (13-)
2
10-18-17 04:15 PM
smokyis350
IS - 2nd Gen (2006-2013)
6
04-18-09 04:01 AM