VA Minor part out: F-sport goodies, IS-F tails, Tanabe
09-09-09, 08:39 PM
#1
Minor part out: F-sport goodies, IS-F tails, Tanabe
EDIT: all items sold and paid for.
So, I decided to trade the sedan in for a vert, and have the following items for sale since they don't fit:
1) SOLD!!!!!Tanabe Medallion exhaust ------> $400 [2 yrs old, ~10000 mi use] ~40 lbs, 59" x 25" x 11"
2) SOLD!!!!!F-sport Sway Bars front and rear (not currently parting)------> $310 [maybe 1 yr old, ~5000 mi use] 20 lbs, 52" x 6" x 18"
3) SOLD!!!!!USDM IS-F tails w/ harness ------> $310 [6 mo old, ~2000 mi ] 7 lb, normal box
4) SOLD!!!!!F-sport Chassis Brace ------> $230 [maybe 1 yr old, ~5000 mi use] 13 lbs, should be regular box
brace has some a small (about quarter sized) section of paint chipped off, but in no ways hampers performance
All parts are in GREAT (if not better) condition, but obviously may have some light road wear. For example, there is a small chip on the rear sway bar, and the chassis brace may have a little paint scrape or two. However, neither affect it's performance one bit. Car was garage kept, and almost never driven in rain.
Shipping is available for ALL items, but it's at your expense. I use UPS ground, but if you wish to use your own method (ie- your own account) that's fine. For a shipping estimate, please use the dimensions provided to determine ship cost. You can use zip 23507 (Norfolk, VA) for the ship from zip, and be sure to include insurance for the purchase price. CONTINENTAL U.S. ONLY PLEASE!!!
Also, I can deliver within ~100 miles of Virginia Beach, VA if needed.
Paypal is fine and will be no extra charge. Pics are available upon request. PM or post with any questions.
So, I decided to trade the sedan in for a vert, and have the following items for sale since they don't fit:
1) SOLD!!!!!Tanabe Medallion exhaust ------> $400 [2 yrs old, ~10000 mi use] ~40 lbs, 59" x 25" x 11"
2) SOLD!!!!!F-sport Sway Bars front and rear (not currently parting)------> $310 [maybe 1 yr old, ~5000 mi use] 20 lbs, 52" x 6" x 18"
3) SOLD!!!!!USDM IS-F tails w/ harness ------> $310 [6 mo old, ~2000 mi ] 7 lb, normal box
4) SOLD!!!!!F-sport Chassis Brace ------> $230 [maybe 1 yr old, ~5000 mi use] 13 lbs, should be regular box
brace has some a small (about quarter sized) section of paint chipped off, but in no ways hampers performance
All parts are in GREAT (if not better) condition, but obviously may have some light road wear. For example, there is a small chip on the rear sway bar, and the chassis brace may have a little paint scrape or two. However, neither affect it's performance one bit. Car was garage kept, and almost never driven in rain.
Shipping is available for ALL items, but it's at your expense. I use UPS ground, but if you wish to use your own method (ie- your own account) that's fine. For a shipping estimate, please use the dimensions provided to determine ship cost. You can use zip 23507 (Norfolk, VA) for the ship from zip, and be sure to include insurance for the purchase price. CONTINENTAL U.S. ONLY PLEASE!!!
Also, I can deliver within ~100 miles of Virginia Beach, VA if needed.
Paypal is fine and will be no extra charge. Pics are available upon request. PM or post with any questions.
Last edited by mikes rx; 09-14-09 at 05:26 AM. Reason: tails sold, dimensions updated, sold items
Trending Topics
09-09-09, 10:03 PM
#9
UPDATE:
Due to the number of requests for ship quotes, please see first post for dimensions and box weight for a couple of items. It would help me immensely if you could please use that information and my ship from zip to get an approximate shipping quote.
If interested thereafter, please let me know and I will just verify before payment.
From the quotes I've done so far, the sways look to be ~$45 insured to California, and the tails look to be ~$18 insured to California. Since I'm on the other side of the country, please let that be a good gauge. Also, those are for residences. Commercial addresses will obviously be cheaper.
Also, I will not be able to get dimensions for the exhaust or brace until tomorrow. I will update the thread then with dimensions.
Thanks,
Mike
Due to the number of requests for ship quotes, please see first post for dimensions and box weight for a couple of items. It would help me immensely if you could please use that information and my ship from zip to get an approximate shipping quote.
If interested thereafter, please let me know and I will just verify before payment.
From the quotes I've done so far, the sways look to be ~$45 insured to California, and the tails look to be ~$18 insured to California. Since I'm on the other side of the country, please let that be a good gauge. Also, those are for residences. Commercial addresses will obviously be cheaper.
Also, I will not be able to get dimensions for the exhaust or brace until tomorrow. I will update the thread then with dimensions.
Thanks,
Mike
09-10-09, 07:21 AM
#13
Unfortunately not.....looking at the f-sport website, the fronts are larger diameter, and both have different spring rates compared to the sedan.
Also, looking under the car, the rear sway isn't nearly as easy to do as the sedan. There's multiple braces under the rear sway bar making it snake-work to replace.
The rear suspension setup is much different from the sedan.
Also, looking under the car, the rear sway isn't nearly as easy to do as the sedan. There's multiple braces under the rear sway bar making it snake-work to replace.
The rear suspension setup is much different from the sedan.
09-10-09, 12:55 PM
#14
UPDATE:
Dimensions added for the exhaust. The box is 59" x 25" x 11", and it weighs 43 lbs. From my calculations on UPS's website, it would cost ~$130 to ship via ground insured to California since I'm on the east coast.
Again, though, if you have a shipping account (ie- your job), I'll work with you on that.
Dimensions added for the exhaust. The box is 59" x 25" x 11", and it weighs 43 lbs. From my calculations on UPS's website, it would cost ~$130 to ship via ground insured to California since I'm on the east coast.
Again, though, if you have a shipping account (ie- your job), I'll work with you on that.
