t0e

iTrader: (1)

Hi, this low profile E-cutout will give you an option to run your stock exhaust and at the same time an ability to make your car sound like it has an open exhaust, all at the push of a button.!

I know this setup will work for any IS-x out there, with stock exhaust or axel-back after market setup.

Even will work for IS-F

Installation:

The low profile e-cutout will replace your OEM "pre-muffler" or "resonator". It connects via cable, to the inside of your car, and at the push of a button you can open up the exhaust and LET IT RIP!!!!!!!!!!!!! hahahah

The e-cutout, has already been welded to a straight pipe for you, so all the exhaust man has to do, is cut the pre-muffler out and weld this e-cutout on.

Reason for selling:

I bought this from radicalrev(if i can remember correctly-lol), but I never got to install it

I need to buy some more camera upgrades, so i have not been able to install this.

Price:

205 = shipped
200 = Local (So Cal/la county/orange county/Ventura etc..)

Pictures up soon.

PM me for info, and post that you did, if you did.

Thanks for looking.

-pauL

aznpapaya

iTrader: (12)

sounds very interesting, you got pm

datplayaz

iTrader: (9)

so when you press the button, does it really give you a open exhaust or just a open exhaust sound?

radicalrev

iTrader: (2)

bump for a great guy!!

when it open, it gives you an open exhaust sound....really aggressive...

t0e

iTrader: (1)

For those that have no idea what an E-cutout is, click on this link:
http://www.youtube.com/watch?v=P0tk5k7Gyp4

Yes, it is controlled though a control unit (with a button), that is connected VIA wire to that black harness, on top of the cut-out.

I believe the installer will use power from your LED wires.

hapaboy

^t0e, you need to pull some fresh yellow cloths out of your 1M towel stash!

x2mkx

sickkk!! i want this so bad . any idea how much it would cost to get this intalled?

datplayaz

iTrader: (9)

do you know what company made the kit?

patrick323

iTrader: (1)

PM sent.

Any info on how to wire? I'm not experienced with wiring. Is this simple?

Anyone heard this on an IS?

I'm highly interested but dont want to sound "buzzy"

radicalrev

iTrader: (2)

me, t0e and Krapwerdna were the only one who heard it....wiring is simple...it took Tommy of Musicbox 20 mins to wire it

t0e

iTrader: (1)

Maybe 30 bucks?

I am not sure who made it, as I purchased it 2nd party.

I found a few videos, which will give you an IDEA, of what an open exhaust isX50 would sound like.

Once you close it up, you will go back to normal silent exhaust, its that easy. That's what this was designed for, when you want to make some NOISE!

Think g35/swap / m3 (ish)

FG2 with E-Cutout
http://www.youtube.com/watch?v=lctK-aaWT5c

IS-F with E-Cutout
http://www.youtube.com/watch?v=D86feQwfqLU

m3-with straight pipe
http://www.youtube.com/watch?v=zRQ4YBWFJBU

http://www.youtube.com/watch?v=gg6ozmFX9Pk

CLK500 E-Cutout Exhaust E-cutout
http://www.youtube.com/watch?v=7LwJ5vH0NUI

G35 E-Cutout
http://www.youtube.com/watch?v=eMeJyR-KfGk

Of course, all cars have different engines, but you should get the point, with these examples.

AM1

iTrader: (6)

hey toe. im gonna Pm you. ill take it.

DEMIK

iTrader: (18)

i thot u were saving this son.

t0e

iTrader: (1)

Hit me up when you are ready!

hapaboy

bump it up!!!