KingNasGS4

iTrader: (22)

Like the Title says, Just trying to get an additional drop and get some LS400 Calipers

No camber wanted.

Let me know what you have.

Thanks

baddis es

iTrader: (3)

PM'd........

KingNasGS4

iTrader: (22)

Forgot to mention that the maximum I'm looking for is ~ 25mm

LudeNsoL

iTrader: (14)

Call me I got a pair (917) 328-0346

GSGenesis

Like I suggested to the other guy looking for a set, since my goal here is to look out for the OP, just call Mike over at FIGS. Ls400 brake install? Just get the bare minimum 17mm which he sells strictly or was made around, the fitment of the BigBrake kits. which he sells for cheaper than most people want for there used sets... He's a good guy too. Cheers. I just got a set of the dowel ones for BigBrake kit install. There perfect.. I'll post a pic

KingNasGS4

iTrader: (22)

Thanks. Id like to see a pic. Before and after

sam430

iTrader: (10)

The dowel can be bought with more than one size. You can couple it and get a longer bolt from figs. Remember to tighten it properly.

GSGenesis

Sure, but your like to see a pic of before and after what? Ride height? Or brakes installed as well? Or a close up of the RCA's installed? Like he said ^ you can buy his dowel's at 17mm, which would just be one, 17mm spacer that's designed to make it so the castle but and what not clears, or, if you'd like even more if a drop, you can get additional ones that are designed to stack and interlock kind of into one another. My car is goin to look the same because in going to raise my coils up 17mm of ride height so it is at the exact height I've dropped it to right now... If I just wanted to lower the car, I've got tons left to lower via coil overs man... If that's what you meant..