Will_GS400

iTrader: (1)

Lexus GS300/400/430 98-05 Front Upper Arm Bushing 2pc/set RC-666091



http://www.roca-usa.com/product.php?...roducts_id=117

I have 2 sets (2 pc per set, 4 pc total). Was going to use for driver and passenger side upper arms, didn't end up installing.

Retails for $51 a set, selling both sets for $65, shipping included in Canada or USA.

Will_GS400

iTrader: (1)

bump, who needs this?

aneidiaz

I need these... But for what I understand I can't change out the actual ball joints to the upper control arm... Yet they're shown here individually so I'm guessing it's possible??? Do you need a press to get this done?? Can someone please lemme know.. If I can just buy these and keep my OEM upper control arms I'd be a happy camper ☺. It's just at the shop where I go they said I need both complete upper control arms & that the ball joints themselves CAN'T be removed and replaced individually... I think this is the "stealership" protocol... Someone PLEASE enlighten me. I definitely need these if I don't need to purchase the whole control arms. Shipping quote to Allentown PA 18202.

Will_GS400

iTrader: (1)

$65 for the set will include shipping to your location. You are able to press/torch the old bushings out, if not, Roca wouldn't sell bushings. I did lower arm and caster arm bushings the same way, local shop torched and pressed the old ones out of the OEM arms, greased and pressed in the new bushings. Saved the cost of having to buy an entire new arm when all that needed replacing was the bushing.

let me know if interested, i'll give you my paypal info.

repugnante

Dude. The OP is selling bushings. Not ball joints.

Will_GS400

iTrader: (1)

bump, still available

Will_GS400

iTrader: (1)

bump, someone buy this

Will_GS400

iTrader: (1)

bump

$50 plus shipping.

Janitor4

HI, i would advise to get the PBS 537 bushings. I had Rocka lasted 24000 miles and are bad again!!!!
I will change for PBS 537 poly bushings !!!