CA WTB Harness/Wiring
#1
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: Jun 2009
Location: Ca
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
WTB Harness/Wiring
Hey guys im looking for harness or wiring for my gs300 2jz im looking for the wiring that goes into the coil pack / spark plug area... I have a short which is causing a misfire i need to be fixed
Thanks
Thanks
#2
What part exactly do you need bro? If you can be a bit more clear or post a pic of the portion you need I may have it for you, prob just give it to you, I've already torn at this harness I've got enough
#5
Ahhhhhhhh coil pack connectors huh.... Dude you are not going to find one single person that will have this for you with out all the connectors being broken my man. I just rewired a lot of my harness and that was def. A portion that's all new. Check it out. Go on ebay, and buy the connectors, and just make yourself a new harness. I wouldn't suggest anything else. The connectors are cheap, and you'll want new ones anyhow. The plastic cooks sitting on the motor and by the time you want to unclip them, they snap. Very common. Here's a link for the ones I purchased. Hang on.
#6
Trending Topics
#9
Well the wires on all of our generation GS's are cooked as well, although they were technically "okay" if bent, the shielding cracked to easily, I didn't feel comfortable just replacing the clips. I just used the same gauge wiring from a actual harness I've been hacking at that I've got, measured lengths, cut the old ones out, soldered the new ones in as far as I could, which was somewhere behind the power steering pump to give you an idea of how much length I replaced, then shrink wrapped it all up, replaced the clips, cleaned up all the wiring into nice paired groups, accordingly and then covered them in there own heat/fire retardant wire loom. Looks clean, now they can easily be moved out of the way whenever I take the valve covers off, and it's new. I can look and see how much I've got, I can toss you the correct wiring man just pay for shipping and were good. Simple job man.
Thread
Thread Starter
Forum
Replies
Last Post
jmecbr900
2Gen GS430 / 400/ 300 Classifieds (98-05)
5
01-01-10 04:17 PM