G000BER

iTrader: (1)

Hey guys im looking for harness or wiring for my gs300 2jz im looking for the wiring that goes into the coil pack / spark plug area... I have a short which is causing a misfire i need to be fixed
Thanks

GSGenesis

What part exactly do you need bro? If you can be a bit more clear or post a pic of the portion you need I may have it for you, prob just give it to you, I've already torn at this harness I've got enough

jwin

iTrader: (16)

I have a complete 2002 gs300 wiring harness.

G000BER

iTrader: (1)

GSGenesis

Ahhhhhhhh coil pack connectors huh.... Dude you are not going to find one single person that will have this for you with out all the connectors being broken my man. I just rewired a lot of my harness and that was def. A portion that's all new. Check it out. Go on ebay, and buy the connectors, and just make yourself a new harness. I wouldn't suggest anything else. The connectors are cheap, and you'll want new ones anyhow. The plastic cooks sitting on the motor and by the time you want to unclip them, they snap. Very common. Here's a link for the ones I purchased. Hang on.

GSGenesis

http://m.ebay.com/itm?itemId=281166605339
Those are them

G000BER

iTrader: (1)

Im actually looking for the wiring parts not the connectors... How would you go as to make your own?
Thanks for your help btw gsg

aliga

iTrader: (147)

i have the wiring, 50 shipped

GSGenesis

Well the wires on all of our generation GS's are cooked as well, although they were technically "okay" if bent, the shielding cracked to easily, I didn't feel comfortable just replacing the clips. I just used the same gauge wiring from a actual harness I've been hacking at that I've got, measured lengths, cut the old ones out, soldered the new ones in as far as I could, which was somewhere behind the power steering pump to give you an idea of how much length I replaced, then shrink wrapped it all up, replaced the clips, cleaned up all the wiring into nice paired groups, accordingly and then covered them in there own heat/fire retardant wire loom. Looks clean, now they can easily be moved out of the way whenever I take the valve covers off, and it's new. I can look and see how much I've got, I can toss you the correct wiring man just pay for shipping and were good. Simple job man.

GSGenesis

Motor looks clean though my man! No oil in the plugs nothing huh! Good, the way it should be!