TX End of summer cleaning sale. Bunch of stuff. 2001+ Tail lights, EDFC, and Turbo Stuff
#1
End of summer cleaning sale. Bunch of stuff. 2001+ Tail lights, EDFC, and Turbo Stuff
This is going to be a long post. I'm cleaning out some of the goodies in my garage. Need to make some room. I threw away a bunch of boxes and cleaned out the garage. Found some of these items stashed away in some of the boxes lol.
Please Email me at powerdynamix@gmail.com because I do not check my PM very often and the PM box is usually full.
SOLD!!! SOLD!!! SOLD!!! The highly sought after 2001-2005 GS300 tail lights. This is for all 4. Includes all the wiring harness and such so you won't have to do any hacking up of your stock harness. They are the OEM Lexus lights taken off my car. Immaculate condition. No scratches AT ALL! $300
SOLD!!! SOLD!!! SOLD!!! 98-2000 GS300 steering wheel cover. I was going to throw this on a car I was selling. I forgot to throw it on and the buyer picked up the car already. It's just sitting around doing nothing. I'm not sure how the colors match up to the stock one. I never had a chance to test fit it. Again, this is only for the 98-2000 GS300. I paid like $75 for it including the shipping. Letting it go for $25.
Tein EDFC. Everything is included in this kit. These usually go for around $350-400 new. All of the cables, wiring, and motors are there. $200
SOLD!!! SOLD!!! SOLD!!! Apexi AVC-R Boost controller. I'm missing the wire harness for this. What you see here is all that is included. These sold for around $600 or so brand new. Since it's missing the harness and parts, I'm going to sell this for $75.
Greddy Turbo Timer. I'm also missing the wire harness on this one. However, you can just solder to the harness directly of this unit. No need to buy a separate harness. $50.
Electromotive TEC3 Standalone ECU. I'm not familiar with this system. I removed it from one of the cars I bought. The car was running beforehand with the system. These sold for around $2500 new. Crank position sensor and custom crank pickup wheel included. If you can sped some time tweaking and get it working, you can have an awesome standalone for stupid cheap. I'm selling this thing for $400.
UEGO 1000 wideband controller and digital gauge.
No idea on the condition of this unit. It was pulled from a car I bought. It should work, but it's missing one of the harness so I couldn't check it. The standalone I put in that car had a built in wideband controller so I have no need for this one. Selling for $50.
Fuel Rails. One is a stock GE rail that is custom machined to fit domestic style 14mm injectors. The other is a GTE fuel rail for 14mm injectors, dual side feed AN-6, and -6 center return. Selling either one for $100.
GTE RAIL IS SOLD
Fuel Injectors. One set is Siemens DEKA 800cc I believe. I'm not 100% sure, but it's the ones that came with the SRT turbo kits. These are the domestic style injector with the 14mm tops. The other set is a set of Precision 1000cc injectors (the set inside the plastic box). I used them on my old setup in my white GS until I upgraded to even bigger injectors. 800cc injectors for $250. 1000cc injectors for $300.
1000cc Injectors SOLD!
SOLD!!! SOLD!!! SOLD!!!
Bosch EV1 type injector clip. These will go with the injectors listed above. Set of 6. Selling for $20.
AEM Peak and Hold Injector Driver. These cost around $300 new. This unit will drive your low impedance as well as high impedance injectors. The stock ECU and most standalones only can support high impedance injectors natively. This driver box will allow you to run either type of injectors in your car. $150.
SOLD!!! SOLD!!! SOLD!!!
2JZ rods, but one has stripped threads. I believe these are Eagle Rods and they normally sell for around $400-500 new. The shop that put these together somehow managed to cross thread one of the bolts. They continued to thread it in anyways and then sent the engine off to the customer!! I found this one when I was tearing down the engine for arebuild and one bolt was stuck! Anyways, 5 of the rods are in perfect condition. These come with ARP2000 rod bolts. The one rod might be salvageable if you can rethread it, but I wouldn't recommend it. I would suggest you buy a new rod from the manufacturer to be safe. Selling this whole set for $150 due to that one rod being damaged.
Please Email me at powerdynamix@gmail.com because I do not check my PM very often and the PM box is usually full.
SOLD!!! SOLD!!! SOLD!!! The highly sought after 2001-2005 GS300 tail lights. This is for all 4. Includes all the wiring harness and such so you won't have to do any hacking up of your stock harness. They are the OEM Lexus lights taken off my car. Immaculate condition. No scratches AT ALL! $300
SOLD!!! SOLD!!! SOLD!!! 98-2000 GS300 steering wheel cover. I was going to throw this on a car I was selling. I forgot to throw it on and the buyer picked up the car already. It's just sitting around doing nothing. I'm not sure how the colors match up to the stock one. I never had a chance to test fit it. Again, this is only for the 98-2000 GS300. I paid like $75 for it including the shipping. Letting it go for $25.
Tein EDFC. Everything is included in this kit. These usually go for around $350-400 new. All of the cables, wiring, and motors are there. $200
SOLD!!! SOLD!!! SOLD!!! Apexi AVC-R Boost controller. I'm missing the wire harness for this. What you see here is all that is included. These sold for around $600 or so brand new. Since it's missing the harness and parts, I'm going to sell this for $75.
Greddy Turbo Timer. I'm also missing the wire harness on this one. However, you can just solder to the harness directly of this unit. No need to buy a separate harness. $50.
Electromotive TEC3 Standalone ECU. I'm not familiar with this system. I removed it from one of the cars I bought. The car was running beforehand with the system. These sold for around $2500 new. Crank position sensor and custom crank pickup wheel included. If you can sped some time tweaking and get it working, you can have an awesome standalone for stupid cheap. I'm selling this thing for $400.
UEGO 1000 wideband controller and digital gauge.
No idea on the condition of this unit. It was pulled from a car I bought. It should work, but it's missing one of the harness so I couldn't check it. The standalone I put in that car had a built in wideband controller so I have no need for this one. Selling for $50.
Fuel Rails. One is a stock GE rail that is custom machined to fit domestic style 14mm injectors. The other is a GTE fuel rail for 14mm injectors, dual side feed AN-6, and -6 center return. Selling either one for $100.
GTE RAIL IS SOLD
Fuel Injectors. One set is Siemens DEKA 800cc I believe. I'm not 100% sure, but it's the ones that came with the SRT turbo kits. These are the domestic style injector with the 14mm tops. The other set is a set of Precision 1000cc injectors (the set inside the plastic box). I used them on my old setup in my white GS until I upgraded to even bigger injectors. 800cc injectors for $250. 1000cc injectors for $300.
1000cc Injectors SOLD!
SOLD!!! SOLD!!! SOLD!!!
Bosch EV1 type injector clip. These will go with the injectors listed above. Set of 6. Selling for $20.
AEM Peak and Hold Injector Driver. These cost around $300 new. This unit will drive your low impedance as well as high impedance injectors. The stock ECU and most standalones only can support high impedance injectors natively. This driver box will allow you to run either type of injectors in your car. $150.
SOLD!!! SOLD!!! SOLD!!!
2JZ rods, but one has stripped threads. I believe these are Eagle Rods and they normally sell for around $400-500 new. The shop that put these together somehow managed to cross thread one of the bolts. They continued to thread it in anyways and then sent the engine off to the customer!! I found this one when I was tearing down the engine for arebuild and one bolt was stuck! Anyways, 5 of the rods are in perfect condition. These come with ARP2000 rod bolts. The one rod might be salvageable if you can rethread it, but I wouldn't recommend it. I would suggest you buy a new rod from the manufacturer to be safe. Selling this whole set for $150 due to that one rod being damaged.
Last edited by JeffTsai; 10-24-12 at 08:11 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
ta1972
2Gen GS430 / 400/ 300 Classifieds (98-05)
1
02-24-16 08:55 AM
TOMMYPHAM
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
2
10-18-13 10:14 AM
GsLex00
2Gen GS430 / 400/ 300 Classifieds (98-05)
2
10-30-11 01:48 PM
GreddyEddy
2Gen GS430 / 400/ 300 Classifieds (98-05)
5
10-14-11 11:39 AM