FS: 98+ GS300 H&R coilovers $1050 (FIRM)
#1
Driver School Candidate
Thread Starter
Join Date: Nov 2002
Location: TX
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
FS: 98+ GS300 H&R coilovers $1050 (FIRM)
I have a COMPLETE set of H&R coilovers (PN# 52404) that were used on my friends Lexus GS300 for nearly 5000 miles. The car was later sold in Dallas and replaced by an Audi S4 (3 years ago!) So yes, they have been sitting for that long.
Here are some specs:
Front: 1.0-1.9
Rear: 1.0-2.0
The original H&R springs were replaced by Intrax springs. Its been a while so I do not know the EXACT specifications for the springs.
The coilovers are in EXCELLENT condition. I know I am new to this board and some of you might question my integrity since this is my first post.
Here is a thread of some references/vouches. (yes, I own a Honda)
http://honda-tech.com/zerothread?id=327955
Best way to get a hold of me is through AIM: migs8729
I check my email once a day: mikeymike1979@hotmail.com
Here are some specs:
Front: 1.0-1.9
Rear: 1.0-2.0
The original H&R springs were replaced by Intrax springs. Its been a while so I do not know the EXACT specifications for the springs.
The coilovers are in EXCELLENT condition. I know I am new to this board and some of you might question my integrity since this is my first post.
Here is a thread of some references/vouches. (yes, I own a Honda)
http://honda-tech.com/zerothread?id=327955
Best way to get a hold of me is through AIM: migs8729
I check my email once a day: mikeymike1979@hotmail.com
Last edited by MigsOLD; 03-05-03 at 01:56 PM.
#2
Driver School Candidate
Thread Starter
Join Date: Nov 2002
Location: TX
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys,
Its been a while since I last checked in. I am selling these coilovers now for $850 shipped. That is the ABSOLUTE lowest I can go.
Thanks,
Mike B
Its been a while since I last checked in. I am selling these coilovers now for $850 shipped. That is the ABSOLUTE lowest I can go.
Thanks,
Mike B
#3
Driver School Candidate
Thread Starter
Join Date: Nov 2002
Location: TX
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Okay, a family emergency has come. My best friends father passed away and I am trying to raise money to help him with the expenses. I am selling this system for $675 shipped to anywhere in the lower 48 states. Please email me at mikeymike1979@hotmail.com
or AIM: migs8729
Thanks, I have a vouch thread on another board if youd like.
$675 SHIPPED
or AIM: migs8729
Thanks, I have a vouch thread on another board if youd like.
$675 SHIPPED
#5
Lexus Fanatic
iTrader: (20)
Why were the springs changed?
#6
Driver School Candidate
Thread Starter
Join Date: Nov 2002
Location: TX
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
My friend had a 97GS300 with the original Blitz Body kit and 19 Advan Model 7's. He didnt find the H&R springs sufficient enough for the look he wanted. He therefore, went with the INTRAX springs which apparently suited his desire.
Trending Topics
#9
Former Sponsor
Join Date: Jan 2003
Location: D2'sville
Posts: 13,002
Likes: 0
Received 0 Likes
on
0 Posts
Need to clarify, are these for a 1st or 2nd gen? The title says 98+, but then you state that they came off a 97. I have a 96 with Inttrax suspension, already but I am concerned that the springs and shocks won't match up.
Anyone know the spring rates, and how the Intrax and H&R will match up??
Anyone know the spring rates, and how the Intrax and H&R will match up??
#11
Lexus Test Driver
Join Date: Feb 2001
Location: Texas
Posts: 1,481
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Migs
Sorry, I meant to say 97+. Its obvious I dont own a Lexus. I am just trying to sell this for my friend. Sorry for the confusion.
Sorry, I meant to say 97+. Its obvious I dont own a Lexus. I am just trying to sell this for my friend. Sorry for the confusion.
Its got to be either 93-97', or 98+.....
#12
Driver School Candidate
Thread Starter
Join Date: Nov 2002
Location: TX
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Well, all I know it looks like the LATER style chassis. Its not the older chassis. I can at least tell you that. I do not know the cut off of the year chassis. If anybody in here is in the Dallas Ft Worth area, you are MORE than welcome to stop by my house in Frisco. I will show you what I have and I will GARANTEE they fit the LATER style chassis.
Again, its obvious I dont OWN and KNOW much about these cars. Im just trying to help a friend sell them who currently lives in Boston.
Sincerely,
Mike B
Again, its obvious I dont OWN and KNOW much about these cars. Im just trying to help a friend sell them who currently lives in Boston.
Sincerely,
Mike B
#13
Thread
Thread Starter
Forum
Replies
Last Post
Nackers
LS460 / 430 / 400 / 600h Classifieds
3
06-19-14 03:47 PM
Jrmitchell
LS - 3rd Gen (2001-2006)
7
02-18-12 02:19 PM
libtech73
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
9
11-12-10 10:49 AM