PA WTB: Retrofitted headlights
#4
Driver
iTrader: (1)
Join Date: Jan 2012
Location: ca
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
here is another tip:
take video or pics of the rear of the head lights before you disassemble them so you know how they go back together.
Also if you need help on how to remove front bumper let me know.
take video or pics of the rear of the head lights before you disassemble them so you know how they go back together.
Also if you need help on how to remove front bumper let me know.
#6
Make sure you seal 'em up good and then better than that!! I just did a retro and the inside of my lenses fog up pretty bad everytime it rains or if I wash the car. I have to hit'em again
Trending Topics
#8
Pole Position
Thread Starter
iTrader: (8)
Join Date: Dec 2010
Location: CA
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
this is info from 21SF he sent:
You need the projectors of choice.
Bulbs to fit those projectors, usually D2S or D4S.
Brackets for the chosen projector from luxurymods
new lights if you chose not to reuse your old ones, depo brand works.
tools: Dremel, hack saw, oven, 10mm socket, 8mm socket, philips screw driver.
Haven't bought anything yet.. im gettin some offers for some sets
You need the projectors of choice.
Bulbs to fit those projectors, usually D2S or D4S.
Brackets for the chosen projector from luxurymods
new lights if you chose not to reuse your old ones, depo brand works.
tools: Dremel, hack saw, oven, 10mm socket, 8mm socket, philips screw driver.
Haven't bought anything yet.. im gettin some offers for some sets
Thread
Thread Starter
Forum
Replies
Last Post
SADDLE
2Gen GS430 / 400/ 300 Classifieds (98-05)
3
03-13-14 01:58 PM
4uhaterz
2Gen GS430 / 400/ 300 Classifieds (98-05)
8
09-14-11 08:28 PM