MD TH400 set up for the big dogs out there!!
08-20-09, 02:58 PM
#1
TH400 set up for the big dogs out there!!
This set up isnt for everyone, but those of you turbo folks out there chasing a strong tranny, this is the set up. No more soft *** shifts, no more rebuilding the tranny, etc, etc, etc....tried and true set up.
I have an AAP Stage 5 TH400 tranny with Pro Torque 3200 stall converter. This will come with everything you need to bolt it up to a 1UZ motor. If you have a 2nd gen GS, you will get the driveshaft thats the right length for it too. This tranny is bullet proof!! By the way, its a pretty easy swap too. I paid over $5500 for this set up, selling for $4000.
I also have a Gear Vendor Over drive unit that is for this set up, makes the 3spd into a 6spd. Paid $2500 for it, selling for $2000.
Both the tranny and the GV OD unit have roughly 200 miles on them.
I have an AAP Stage 5 TH400 tranny with Pro Torque 3200 stall converter. This will come with everything you need to bolt it up to a 1UZ motor. If you have a 2nd gen GS, you will get the driveshaft thats the right length for it too. This tranny is bullet proof!! By the way, its a pretty easy swap too. I paid over $5500 for this set up, selling for $4000.
I also have a Gear Vendor Over drive unit that is for this set up, makes the 3spd into a 6spd. Paid $2500 for it, selling for $2000.
Both the tranny and the GV OD unit have roughly 200 miles on them.
08-21-09, 01:18 PM
#2
This set up isnt for everyone, but those of you turbo folks out there chasing a strong tranny, this is the set up. No more soft *** shifts, no more rebuilding the tranny, etc, etc, etc....tried and true set up.
I have an AAP Stage 5 TH400 tranny with Pro Torque 3200 stall converter. This will come with everything you need to bolt it up to a 1UZ motor. If you have a 2nd gen GS, you will get the driveshaft thats the right length for it too. This tranny is bullet proof!! By the way, its a pretty easy swap too. I paid over $5500 for this set up, selling for $4000.
I also have a Gear Vendor Over drive unit that is for this set up, makes the 3spd into a 6spd. Paid $2500 for it, selling for $2000.
Both the tranny and the GV OD unit have roughly 200 miles on them.
I have an AAP Stage 5 TH400 tranny with Pro Torque 3200 stall converter. This will come with everything you need to bolt it up to a 1UZ motor. If you have a 2nd gen GS, you will get the driveshaft thats the right length for it too. This tranny is bullet proof!! By the way, its a pretty easy swap too. I paid over $5500 for this set up, selling for $4000.
I also have a Gear Vendor Over drive unit that is for this set up, makes the 3spd into a 6spd. Paid $2500 for it, selling for $2000.
Both the tranny and the GV OD unit have roughly 200 miles on them.
Thread
Thread Starter
Forum
Replies
Last Post
TTurboPimp
2Gen GS430 / 400/ 300 Classifieds (98-05)
4
10-19-09 05:31 PM