MD FS: 98 Aristo 2jz-gte Auto Transmission
04-24-09, 05:30 PM
#1
Lead Lap
Thread Starter
iTrader: (1)
Join Date: May 2006
Location: MD
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
FS: 98 Aristo 2jz-gte Auto Transmission
Have a 98 Aristo 2jz-gte Auto Transmission in great shape. Includes linkage. Using stock is300 auto trans instead when doing a swap for someone.
Pickup preferred but will ship at buyer's expense.
$150
Pickup preferred but will ship at buyer's expense.
$150
04-24-09, 08:34 PM
#3
Lead Lap
Thread Starter
iTrader: (1)
Join Date: May 2006
Location: MD
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
I have to get the exact weight on it but based on an estimated weight of 150 and size it should be around $125.
I will weigh it in the morning and let you know exact....
I will weigh it in the morning and let you know exact....
04-25-09, 07:43 AM
#5
Lead Lap
Thread Starter
iTrader: (1)
Join Date: May 2006
Location: MD
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Honestly, I am not too sure...I am selling for someone who I am helping do a swap into his is300. He did say that the trans is supposed to be stronger but for him it wont fit in his is300 as this is from an aristo so he is going to hope his stock trans can hold up.
You could also have some ooey gooey JDM goodness :-) LOL
You could also have some ooey gooey JDM goodness :-) LOL
04-25-09, 10:51 AM
#6
Lead Lap
Thread Starter
iTrader: (1)
Join Date: May 2006
Location: MD
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Just weighed it...134lbs without the torque converter nor the packaging. Therefore, it will be roughly 150lbs when all packed and ready to go. Shipping will be right around $115. Let me know and I could do $250 shipped!
Trending Topics
04-26-09, 06:10 PM
#8
Lead Lap
Thread Starter
iTrader: (1)
Join Date: May 2006
Location: MD
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Let me know, we can work something out! I can get it out to you tomorrow!
Either PM me, email me jefferinoenterprises@gmail.com or respond here...
Either PM me, email me jefferinoenterprises@gmail.com or respond here...
04-27-09, 07:29 AM
#10
Lead Lap
Thread Starter
iTrader: (1)
Join Date: May 2006
Location: MD
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Hi Josh,
I just asked my buddy who bought the motorset and he was informed that it had between 50 and 60k on it. As a good note, when I pulled off the torque converter the trans fluid that I drained was extremely clean...and the motor itself was SUPER clean when the valve covers were popped open. As such, I believe this motor was VERY well taken care of. One of the cleanest I have seen and I have swapped or helped swap at least 15 motors before this...
I just asked my buddy who bought the motorset and he was informed that it had between 50 and 60k on it. As a good note, when I pulled off the torque converter the trans fluid that I drained was extremely clean...and the motor itself was SUPER clean when the valve covers were popped open. As such, I believe this motor was VERY well taken care of. One of the cleanest I have seen and I have swapped or helped swap at least 15 motors before this...
Thread
Thread Starter
Forum
Replies
Last Post
