GS400 Supercharger Kit
05-21-07, 05:00 PM
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2007
Location: new york
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
GS400 Supercharger Kit
This is a custom Rod Millen supercharger kit. The kit only has 250 miles on it. The reason why the kit was removed because I was offered a GREAT amount for the car without the supercharger. So I removed it and it has been sitting in my garage for a few months. The kit is just collecting dust because I no longer have use for it and I no longer have a GS400. The kit is in basically brand new condition. And I emphasize ONLY 250 MILES!!!!!!
Rod Millen Vortech V1 Supercharger w/ Bracket
Upgraded RC440 Injectors (requires new o-rings b/c reused with the stock injectors when put back in the car)
Upgraded Spearco Integercooler. (DIMENSIONS: 29 X 10 X 3.5) w/ HKS 90 Degree Elbow
2 Pulley Upgrade.
#1 287 Pulley (6-8 psi) This pulley is what I recomment for the supercharger kit. I was using this on my car for reliability
#2 262 Pulley (8-10 psi)
HKS Super Sequential Blow Off Valve w/ Piping
Super AFC (SAFC) Fuel Air Mix Piggy Back System
2 New Serpentine Belts
Stainless Steel T-Bolt Clamps
Upgraded Blitz Stainless Steel Air-filter
Oil Return and Feed Lines
Polished Custom Aluminum Piping
REQUIRED:
3 Bolts For The Supercharger Bracket Which Can be Easily Found
Rubber Hose For Power Steering Resevoir Because It Needs To Be Relocated
Custom Hole Behind Passenger Side Headlight Needs To Be Made In Order To Have The Pipe Reach The Top Of The Intercooler
I installed this kit by myself and its pretty straight forward to install. For other people maybe requires professional installation.
Rod Millen Vortech V1 Supercharger w/ Bracket
Upgraded RC440 Injectors (requires new o-rings b/c reused with the stock injectors when put back in the car)
Upgraded Spearco Integercooler. (DIMENSIONS: 29 X 10 X 3.5) w/ HKS 90 Degree Elbow
2 Pulley Upgrade.
#1 287 Pulley (6-8 psi) This pulley is what I recomment for the supercharger kit. I was using this on my car for reliability
#2 262 Pulley (8-10 psi)
HKS Super Sequential Blow Off Valve w/ Piping
Super AFC (SAFC) Fuel Air Mix Piggy Back System
2 New Serpentine Belts
Stainless Steel T-Bolt Clamps
Upgraded Blitz Stainless Steel Air-filter
Oil Return and Feed Lines
Polished Custom Aluminum Piping
REQUIRED:
3 Bolts For The Supercharger Bracket Which Can be Easily Found
Rubber Hose For Power Steering Resevoir Because It Needs To Be Relocated
Custom Hole Behind Passenger Side Headlight Needs To Be Made In Order To Have The Pipe Reach The Top Of The Intercooler
I installed this kit by myself and its pretty straight forward to install. For other people maybe requires professional installation.
05-22-07, 05:33 AM
#5
Forum Administrator
iTrader: (2)
Hi Val,
Please have an established CL member PM a personal vouch to me for this sale.
https://www.clublexus.com/forums/sho...d.php?t=204667
Please have an established CL member PM a personal vouch to me for this sale.
https://www.clublexus.com/forums/sho...d.php?t=204667
15. New members (either recent joiners by date or few posts) selling high dollar items may have their threads closed or removed due to the risk to our members due to the risk to our members. High dollar items are generally those over $500 but may be defined by moderator's discretion. New members selling high dollar items should be prepared or proactive in offering references from other CL members who know them, on other forums, etc.
Thread
Thread Starter
Forum
Replies
Last Post
airbender
2Gen GS430 / 400/ 300 Classifieds (98-05)
3
11-09-19 08:27 AM
flekz
2Gen GS430 / 400/ 300 Classifieds (98-05)
5
06-06-07 01:37 PM
