FS: Rare Complete RMM Supercharger Kit
#1
Lexus Champion
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: Tennesee
Posts: 3,465
Likes: 0
Received 0 Likes
on
0 Posts
FS: Rare Complete RMM Supercharger Kit
Well I am selling my RMM Supercharger kit, it is complete with V2 Vortech supercharger, Bracket, Piping, intercooler, injectors and all parts needed to install it. I can probably get you a set of installation directions or you can come to Metro Atlanta and I can get my shop to install it for you at a very good price.
This kit is no longer available so if you want it you better jump on it, these kits do not come up for sale often.
I made 389 Hp consistently with this kit, I can also provide the Dyno chart to prove it if you like. In fact I have posted it here on CL in the past.
I am selling it because it does not meet my ultimate HP goals. This kit was designed by RMM for 5 pounds of boost I was able to run it connsistenly and reliably at 7 pounds.
The kit includes a 3.12 pulley and I will throw in the 2.87 pulley at no extra charge. The attached photo shows the kit installed in my car but with a cogged pulley setup, the cogged setup does not come with the kit but I will sell it separately if it is wanted.
Price reduced to 4250 shipped.
P.S. I had this blower rebuilt by Vortech two weeks ago so it is brand new and has less than 100 miles on it. I will be removing it from the car tomorrow.
This kit is no longer available so if you want it you better jump on it, these kits do not come up for sale often.
I made 389 Hp consistently with this kit, I can also provide the Dyno chart to prove it if you like. In fact I have posted it here on CL in the past.
I am selling it because it does not meet my ultimate HP goals. This kit was designed by RMM for 5 pounds of boost I was able to run it connsistenly and reliably at 7 pounds.
The kit includes a 3.12 pulley and I will throw in the 2.87 pulley at no extra charge. The attached photo shows the kit installed in my car but with a cogged pulley setup, the cogged setup does not come with the kit but I will sell it separately if it is wanted.
Price reduced to 4250 shipped.
P.S. I had this blower rebuilt by Vortech two weeks ago so it is brand new and has less than 100 miles on it. I will be removing it from the car tomorrow.
Last edited by morris; 02-11-05 at 07:36 AM.
#2
Lexus Fanatic
wow
well this should sell right away
put TTurbopimp theory to test
evryone says they want it
lets see if its true
good luck with your sale
i would buy it
but ive spent some recently
but if it doesnt sell
keep me in mind
-johnny
well this should sell right away
put TTurbopimp theory to test
evryone says they want it
lets see if its true
good luck with your sale
i would buy it
but ive spent some recently
but if it doesnt sell
keep me in mind
-johnny
#5
Lexus Fanatic
iTrader: (7)
morris , with the 3.12 pully how much power and at what boost.. if at 5-6lbs did you have the belt slippage problems or did you only exp that with the 2.87 pully.. are the injectors and intercooler etc included
in all honesty i am not after high hp numbers , if i can get an extra 110-130 to the wheels and have no reliablility issues and belt problems etc thats what i am after
in all honesty i am not after high hp numbers , if i can get an extra 110-130 to the wheels and have no reliablility issues and belt problems etc thats what i am after
#6
Originally Posted by morris
Well I am selling my RMM Supercharger kit, it is complete with V2 Vortech supercharger, Bracket, Piping, intercooler, injectors and all parts needed to install it. I can probably get you a set of installation directions or you can come to Metro Atlanta and I can get my shop to install it for you at a very good price.
This kit is no longer available so if you want it you better jump on it, these kits do not come up for sale often.
I made 389 Hp consistently with this kit, I can also provide the Dyno chart to prove it if you like. In fact I have posted it here on CL in the past.
I am selling it because it does not meet my ultimate HP goals. This kit was designed by RMM for 5 pounds of boost I was able to run it connsistenly and reliably at 7 pounds.
The kit includes a 3.12 pulley and I will throw in the 2.87 pulley at no extra charge. The attached photo shows the kit installed in my car but with a cogged pulley setup, the cogged setup does not come with the kit but I will sell it separately if it is wanted.
Price is $5000.00
P.S. I had this blower rebuilt by Vortech two weeks ago so it is brand new and has less than 100 miles on it. I will be removing it from the car tomorrow.
This kit is no longer available so if you want it you better jump on it, these kits do not come up for sale often.
I made 389 Hp consistently with this kit, I can also provide the Dyno chart to prove it if you like. In fact I have posted it here on CL in the past.
I am selling it because it does not meet my ultimate HP goals. This kit was designed by RMM for 5 pounds of boost I was able to run it connsistenly and reliably at 7 pounds.
The kit includes a 3.12 pulley and I will throw in the 2.87 pulley at no extra charge. The attached photo shows the kit installed in my car but with a cogged pulley setup, the cogged setup does not come with the kit but I will sell it separately if it is wanted.
Price is $5000.00
P.S. I had this blower rebuilt by Vortech two weeks ago so it is brand new and has less than 100 miles on it. I will be removing it from the car tomorrow.
#7
Lexus Champion
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: Tennesee
Posts: 3,465
Likes: 0
Received 0 Likes
on
0 Posts
Lex I dont know what it made with the 3.12 at 5-6 pounds you would have to go by others experience. The 389 I made with the 2.87 and that ran fine for me, I didnt start having slippage problems untill I tried the 2.62 10-12 pound pulley.
The 3.12 gave no problems at the 5-6 pounds I am sure it had at least 100+ more to the wheels. Rmm used to have dyno charts for it.
yes the 310 injectors are included and the intercooler, as I said everyting you need to install it is included.
Blue Lex dont worry the clocks running but I hope to be riding in style by then.
The 3.12 gave no problems at the 5-6 pounds I am sure it had at least 100+ more to the wheels. Rmm used to have dyno charts for it.
yes the 310 injectors are included and the intercooler, as I said everyting you need to install it is included.
Blue Lex dont worry the clocks running but I hope to be riding in style by then.
Trending Topics
#9
Lexus Champion
iTrader: (2)
Join Date: Aug 2004
Location: Pennsylvania
Posts: 2,134
Likes: 0
Received 0 Likes
on
0 Posts
AHHH I NEED THIS KIT!!! i've been looking all OVER for it... problem is im a highschool student.. and i don;t got 5g's to buy the kit... maybe if i sold my rims and all my other stuff... how much can i sell 19 inch Alstadts for?
#10
Lexus Fanatic
Originally Posted by BrianGS430
AHHH I NEED THIS KIT!!! i've been looking all OVER for it... problem is im a highschool student.. and i don;t got 5g's to buy the kit... maybe if i sold my rims and all my other stuff... how much can i sell 19 inch Alstadts for?
sell me some stuff
Morris whats the name of the shop ??
#11
Lexus Champion
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: Tennesee
Posts: 3,465
Likes: 0
Received 0 Likes
on
0 Posts
its called Mahdavi motorsports they have done several RMM kits and countless other SC and Turbo installs including complete custom builds.
www.mahdavimotorsports.com
Speak with Sam and tell him Morris sent you.
www.mahdavimotorsports.com
Speak with Sam and tell him Morris sent you.
#15
Lexus Champion
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: Tennesee
Posts: 3,465
Likes: 0
Received 0 Likes
on
0 Posts
hows this, I'm trying to gets some shots from teh original install but so far I dont have them with the bumper removed.
And ahhh whats Gettins, I probably do want some.
And ahhh whats Gettins, I probably do want some.