BTW, my MOD went like this. For example, I could not get the pins out as SonarTech suggested, so I cut both the orange and sky blue wires. I left myself as much extra wire length as possible on the connector side of the orange wire and on the wire harness side of the sky blue wire. This is because I then connected the wire harness side of the sky blue wire (Multi Display Connector E62) to the short length of orange wire that was coming out of the Nav-ECU Connector P2 at the Pin 4 position. Finally I insulated the wire harness side of the orange wire and also insulated the connector side of the sky blue wire.
I did have to solder a short "extender wire" between the orange and sky blue wires in order to reach between them.
JerFitz
|