javyLSU

iTrader: (21)

Want to know if your wheels will fit? Will it rub? What's the best offset? What sizes and widths should I buy? Start here.

This thread is the result of merging over 100 threads on the same topic - will these wheels fit on my IS? Feel free to ask any questions you may have on whether your specific wheels will fit on the 2IS, but please search this thread first - as you can see, there's plenty of information here already.

EDIT: For those of you searching or IS250 AWD fitment information, this thread should yield some great information.

Javier

kilo6_one

iTrader: (2)

mods, if i posted this in the wrong section please move.......

im intrested in getting some g-games barracuda rims for my IS, it currently dropped on eibachs and have 19"s, my question is can i run a 10.5 out back with a 40mm or 32mm offset? I have 19x9.5 now with a 32mm offset and it looks like i could go another inch........

anyone with in knowlege in this area?

kilo6_one

iTrader: (2)

thank you for the information

ExKoukiS14

pics? i'm currious to what a 32mm offset looks with a 9.5 wheel.
Most people say to run 40mm, but i think that's really high.

T-Rex06

iTrader: (12)

I have Barracuda with 40mm offset with 9.5 on the rear. I think 32mm will be kind of pushing the envelope. I might be wrong though. I also have Tein CS with about one finger gap all around. Here are a couple of pics for reference.

kilo6_one

iTrader: (2)

it think it has to do with the disk pad too........i talked to some people and 32 would be pushing it. T-rex that looks really clean, not to jock your style but i saw your pics last week and it made me decide to switch out the rims i have currently. do you have any other pics? does the 40mm tuck alot in the front?

T-Rex06

iTrader: (12)

Thanks man. As far as the front rims are concerned, they don't tuck in much at all. They are very close to being flushed with the fenders. If you're in So.Cal area, you're more than welcome to check it out in person before you make up your mind.

9520G

Is that a lambo I see in the reflection, you are definitley choosing the right friends!

T-Rex06

iTrader: (12)

Haha, I knew the lambo will come up in the discussion again.

kilo6_one

iTrader: (2)

No im in central cal, could you by chance take a picture from the rear..... dead on so i can see? hey is that a lambo? LOL.........

Lexo350

iTrader: (1)

Will a 19X9 with offset 40 or 43 fit on an IS350?

al503

I would definitely say no on the +43. You're going to be touching or too close to the spindle.

On the +40, you may clear the spindle but it would be too close for comfort IMO. With a +40 and an 8.5" wheel, I have ~3/8" clearance between the wheel lip and the spindle. With an 9" wheel at +40, you'll be 1/4" closer to that spindle leaving ~1/8" of clearance. In addition, you won't be able to put on the 'correct' width tires as they will be wider than the wheel itself.

gassman

Def 19x8 or 8.5 in front. It will not look good or proportional with 19x9s unless it is a true race setup.

VitB6

I want to purchase 17" non-OEM rims for winter on my IS350 (currently with 18"). What specs do I have to make sure these other 17" rims have to make sure they fit over the brakes?

I'm ready to buy tires and rims, but don't want to make a mistake and purchase something that won't work.

TIA

Vit

VitB6

Bump.

Anyone?