AZ FS: Shifter housing and Short shifter
03-31-15, 05:41 PM
#1
FS: Shifter housing and Short shifter
This is a shifter housing found on JZX Chaser/Verossa R154 transmission. It extends the shifter about 29 inches from the bellhousing.
This will fit AR5 transmission, and the shifter will sit exactly in the center on the shifter hole tunnel for the IS300.
My AR5 will go into an MK4 and I need longer than 29 inches, it will still fit but i will have to use a swan neck, I decided to fabricate so it will sit right into my MK4 tunnel hole.
These are brand new, just mocked up on the transmission. Not available in the US and I ordered this from Japan. Housing will come with a breather, not pictured, still in transit.
The Ralco shifter is new as well and it perfectly fits the JZX housing.
$230 shipped
This will fit AR5 transmission, and the shifter will sit exactly in the center on the shifter hole tunnel for the IS300.
My AR5 will go into an MK4 and I need longer than 29 inches, it will still fit but i will have to use a swan neck, I decided to fabricate so it will sit right into my MK4 tunnel hole.
These are brand new, just mocked up on the transmission. Not available in the US and I ordered this from Japan. Housing will come with a breather, not pictured, still in transit.
The Ralco shifter is new as well and it perfectly fits the JZX housing.
$230 shipped
Last edited by gerrb; 04-22-15 at 11:00 AM. Reason: OP Request
Thread
Thread Starter
Forum
Replies
Last Post
Blk97SC300
Performance & Maintenance
72
05-29-09 01:44 PM