white_is

iTrader: (4)

Guys, I'm not parting out a car. If it's not pictured or listed I don't have it. These are just parts that I've bought over time. I need to clear out some space in my garage so I would like to consolidate.

Lots of stuff for sale from a SPARE motor I bought last summer. Planned to rebuild it but I want to refinish my wheels so I'd rather sell this stuff.

Motor was from a 2002 Lexus IS300, automatic, with 100,000 miles on it. The car was in a wreck (rollover) and totaled, but I was told they started it and the motor ran after the wreck. There is some build up, but otherwise everything looks good.

Lowest oil pan DOES have a dent in it.



2jzge vvti block
PENDING
Internals $30 plus shipping
Crank PENDING
Bare block PENDING
Oil pump PENDING

http://i1191.photobucket.com/albums/...ps84116c02.jpg
http://i1191.photobucket.com/albums/...ps2aea713d.jpg
http://i1191.photobucket.com/albums/...ps3c9a8fb1.jpg
http://i1191.photobucket.com/albums/...psa1cb50ff.jpg
http://i1191.photobucket.com/albums/...ps30af38da.jpg
http://i1191.photobucket.com/albums/...ps947ef2e6.jpg
http://i1191.photobucket.com/albums/...psb9572eb4.jpg
http://i1191.photobucket.com/albums/...pse2f1a6f8.jpg


Juran front strut bar $130 shipped






2jzge vvti head SOLD
http://i1191.photobucket.com/albums/...psba80900b.jpg
http://i1191.photobucket.com/albums/...psd7c7b00e.jpg
http://i1191.photobucket.com/albums/...ps91e1a58e.jpg
http://i1191.photobucket.com/albums/...psee2293a0.jpg
http://i1191.photobucket.com/albums/...psa009fa5b.jpg
http://i1191.photobucket.com/albums/...ps5aef1fa6.jpg

Crank pulley and bolt SOLD
http://i1191.photobucket.com/albums/...ps2dd68e3e.jpg


Random Parts
Small lines PENDING
Intake canister PENDING
Lower cover SOLD
Injectors PENDING
Motor mounts (SOLID piece only) PENDING
Tensioner arms parts PENDING
Upper intake plenum PENDING

http://i1191.photobucket.com/albums/...pse5b380d4.jpg
http://i1191.photobucket.com/albums/...ps85ae88b0.jpg


Stock cams - Caps go with head
$30 plus shipping for everything

http://i1191.photobucket.com/albums/...ps4e44697e.jpg
http://i1191.photobucket.com/albums/...ps0dbb0c95.jpg
http://i1191.photobucket.com/albums/...ps0dbb0c95.jpg

More random parts
Valve covers SOLD
Stock head studs $15 plus shipping
Cam gear backing plate SOLD
vvti cam gear SOLD
Exhaust cam gear SOLD
Small oil hard line SOLD
Water pump stuff $25 plus shipping
Small tensioner SOLD
Large tensioner SOLD

http://i1191.photobucket.com/albums/...psc3a2b2d0.jpg
http://i1191.photobucket.com/albums/...ps87af3d19.jpg

Oil pan parts
Upper pan PENDING
Baffle PENDING
Lower pan PENDING
Pick tube SOLD
Oil Dip stick PENDING

http://i1191.photobucket.com/albums/...ps5b045950.jpg
http://i1191.photobucket.com/albums/...ps63effb57.jpg
http://i1191.photobucket.com/albums/...pse48a68e1.jpg
http://i1191.photobucket.com/albums/...ps6d202f37.jpg


Please be patient, all parts are in Joplin, MO but I'm going to school in Fayetteville, AR which is 60ish miles away. I am usually able to get home on the weekends to package and ship things.


Will consider trades for:
Carbing, Cusco, TRD strut bars
Carbing, Cusco, TRD under braces
Figs traction links, foot plates, head heat shield,
Figs CNC battery bar, rear upper control arm bushings
Figs rear lower knuckle bushings, rear traction link knuckle bushing
BC Racing extreme drop 16k, 14k :lol:
Vertex Steering wheel
Works bell hub
Kaminari, Toms, maybe TRD rear trunk spoiler
Pair of 215/35/18, 215/40/18, 225/35/18 tires
Bride Zeta 3 in black
Old school TRD fixed back seat
Stock #2 front lower control arms
Stock front and rear subframes
Stock front and rear knuckles/hubs
OEM style carbon fiber hood (cheap, will be cut/painted)

Long shot on a lot of stuff, but it gives you an idea of what I'm interested in :lol: :approve:

white_is

iTrader: (4)

Send me offers I need this motor stuff gone!!

mitsuguy

iTrader: (2)

you do know the cam caps are specific to that head and will only ever work on that head without being line honed...

it doesn't make any sense to sell them separately from the head

white_is

iTrader: (4)

If I knew that I wouldn't have listed them as I did.

white_is

iTrader: (4)

Fog lights One has overspray on it. I will be trying to remove it without wetsanding but that may be what it takes. Shouldn't be a big deal. I was able to get all of the overspray off the other one but it didn't have as much. Small scratches on each lens that would probably be removed with wetsand/buffing.
Fog Lights Photos by white_is | Photobucket

Grille Great shape structurally. All tabs are good, Altezza badge is good shape, mesh is good shape. Paint isn't bad. There are a couple scuffs. The paint looks great wet. I think a good buff/polish and it would look great.
Grille Photos by white_is | Photobucket

Front Bumper Has one crack on the passenger side underneath. About 1.5" long maybe? I didn't notice it until I cleaned it. Poly can be fixed. Other than that it has a good about of scraps, scuffs, but there is no real damage otherwise. One tab is broken that mounts to the fender but it's all there and can be fixed. All other tabs are in good shape. Really ****ty paint for some reason though.
Neo Front Bumper Photos by white_is | Photobucket

Rear Bumper All tabs are good. No damage other than some scuffs, scraps in the paint. Rear lip is in good shape. There's one weird spot underneath on the lip/bumper that looks warped but its a bent bracket holding the lip to the bumper. Again, ****ty paint.
Neo Rear Bumper Photos by white_is | Photobucket

Side Skirts Great shape. Only a couple scraps, scratches. Paint isn't great.
Neo Side Skirts Photos by white_is | Photobucket




PLEASE let me know if those links don't work. They work for me.
Going out now to start packaging pending parts.



A few parts have been sold.
A few parts are pending payment.
Will update as necessary :approve:

white_is

iTrader: (4)

Price drops

cantdrift

buy my kit. mbn sports!

white_is

iTrader: (4)

lol I'd love to, but I want to refinish my wheels

DLo_IS300

iTrader: (3)

could i get a better picture of the accessory belt tensioner? thanks!

white_is

iTrader: (4)

I'll see if I can have someone take a couple tomorrow. I'm away at school now and won't be back until the weekend. I'll let you know though!

IIJZSC300

iTrader: (2)

Will take the union bolt pm paypal info

white_is

iTrader: (4)

PM'd you... It's ready to ship if you still want it

Soarin96

iTrader: (1)

Ill take the union bolt tonight if available. Text me if it is.727 906 1818

white_is

iTrader: (4)

I'll text you tomorrow. I still have it but I'd prefer to sell the filter housing and bolt together.

PhantomGTE

Lower oil pan still available??? If so, shipping to 22193.
Thanks!