WA Need rebuildable twins, harness, and other bits
#1
Rookie
Thread Starter
Join Date: Aug 2011
Location: WA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Need rebuildable twins, harness, and other bits
Sorry to be gone so long.... Work took me away from my 1gs build. I am looking for a set of rebuild-able twins, an intact non molested, all connectors intact harness from a 94 Aristo, or similar. Please no flakes!!! I purchased a set of twins from a member on this site and forum, and never received them. I am not going to name names in hopes he see's this post and refunds my money, but if not, I will ask for forum retribution...I was burned for 300. I also need a crusie control module and cable that will work with a swapped GTE. Need new suspension components and brake components as well, so let me know what you have. I do not need shocks or struts...already have airbags to go on. Thanks all for your response. Oh, and I have cash waiting for the right stuff.
Last edited by Boosted1st; 04-06-13 at 07:33 AM. Reason: Spelling, title change
#3
Lead Lap
iTrader: (2)
I have a harness from a japanese 2jzge supra 1st gen. The motor was just put in my gs300 a week ago. Ill let it go with ECU for 100$ + s/h. Would this work for you?
http://i389.photobucket.com/albums/o...922_092632.jpg
I also have the throttle body with one cable cut and the other (cruise control?) still there.
http://i389.photobucket.com/albums/o...922_092037.jpg
http://i389.photobucket.com/albums/o...922_092632.jpg
I also have the throttle body with one cable cut and the other (cruise control?) still there.
http://i389.photobucket.com/albums/o...922_092037.jpg
Last edited by kene; 09-28-13 at 12:51 PM.
#6
Rookie
Thread Starter
Join Date: Aug 2011
Location: WA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Update
Still looking for a cruise control module. Still looking for a good set of stock twins. Looking for a shifter console, good shape, without the wood trim would be preferred as I have brushed aluminum plate I am putting on. Might need a stock throttle body with sensors, but I will know more after this weekend. Also looking for replacement front suspension pieces, went to put on the bags and found some worn out equipment...
#7
Rookie
Thread Starter
Join Date: Aug 2011
Location: WA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Still looking for a cruise control module. Still looking for a good set of stock twins. Looking for a shifter console, good shape, without the wood trim would be preferred as I have brushed aluminum plate I am putting on. Might need a stock throttle body with sensors, but I will know more after this weekend. Also looking for replacement front suspension pieces, went to put on the bags and found some worn out equipment...
Trending Topics
#10
Rookie
Thread Starter
Join Date: Aug 2011
Location: WA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Still looking for parts
Twins still needed, Cruise control module and cable still needed, Cup Holder (grey) still needed, Window molding for the drivers side still needed. Cash available for the right parts. A good clear set of headlights with clean lenses and no cracks is also something I am looking for.
#11
Rookie
Thread Starter
Join Date: Aug 2011
Location: WA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Twins still needed, Cruise control module and cable still needed, Cup Holder (grey) still needed, Window molding for the drivers side still needed. Cash available for the right parts. A good clear set of headlights with clean lenses and no cracks is also something I am looking for.
#14
Rookie
Thread Starter
Join Date: Aug 2011
Location: WA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Update: Purchased a new harness from Tweak'd performance. Still need twins, the entire set up. I want a set I can sent in to get upgraded to GT25 centers. Purchased the cruise control module. I still need a grey cup holder and the wood trim pieces console, ashtray, and window controls trim.
#15
Rookie
Thread Starter
Join Date: Aug 2011
Location: WA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Parts Still needed
Update: Now I am down to needing a grey cup-holder, and the interior wood trim pieces. I dont want to go with the Ebay stick on stuff, but I am running out of options. Someone have some clean interior parts they need to get out of the way? Thanks to any and all who respond. Oh yes, still want a set of twins I can get upgraded. Thanks