OR 2JZGTE Aristo ECU And EXTENDED Harness
08-10-10, 02:00 PM
#1
Rookie
Thread Starter
iTrader: (4)
Join Date: Nov 2009
Location: OR
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
2JZGTE Aristo ECU And EXTENDED Harness
Im Selling My NON VVTI 2JZGTE ECU and Engine Harness.. I Already Extended it and ran it for 2 years on my 1st gen GS300 With Aristo Swap.. Everything Works Fine.. and all the clips are in good shape.. As im Showing in the Pics There are a few plugs cut as listed:
The Starter Ground 1 wire (Female standard clip)
The thermostat Ground 1 Wire (same Female Clip)
And the 6 Coil Pack Clips (they tend to crumble and you can buy them at toyota heres the part # Electrical Ignition Coil Pack Connectors (plastic) 90980-11246 and there $7.62 EA.)
And the ECU is a Aristo ECU auto Trans.. The Sticker Rubbed off i know.. But it usualy says "2JZ-GT"..
Prices:
ECU $165
Harness $250
Both For $400 Shipped
Let me know if your intrested..
Cody-
Duninc@gmail.com
(503) 929-9678
The Starter Ground 1 wire (Female standard clip)
The thermostat Ground 1 Wire (same Female Clip)
And the 6 Coil Pack Clips (they tend to crumble and you can buy them at toyota heres the part # Electrical Ignition Coil Pack Connectors (plastic) 90980-11246 and there $7.62 EA.)
And the ECU is a Aristo ECU auto Trans.. The Sticker Rubbed off i know.. But it usualy says "2JZ-GT"..
Prices:
ECU $165
Harness $250
Both For $400 Shipped
Let me know if your intrested..
Cody-
Duninc@gmail.com
(503) 929-9678
08-10-10, 02:11 PM
#2
Rookie
Thread Starter
iTrader: (4)
Join Date: Nov 2009
Location: OR
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Few more Pics
Here's a few more pics.. the cut wires and the ecu inside pins.. All straight
And the 1 wire by the ecu needs to be re attached.. Was Running a HKS FCD
And the 1 wire by the ecu needs to be re attached.. Was Running a HKS FCD
Thread
Thread Starter
Forum
Replies
Last Post
